 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| pnx8526 programmable source decoder with integrated peripherals rev. 01 ? 6 october 2003 preliminary data 1. general description the pnx8526 is a highly integrated medi a processor for use in advanced set top boxes (astb) and digital television (dtv) systems. the pnx8526 is targeted at the mid to high-end astb/dtv systems, dec oding ?all format? hd and sd mpeg2 source material with standard definition (sd), or double line-rate sd display capabilities. although the pnx8526 can proce ss high level input formats, its display capabilities are primarily targeted at ntsc , pal and secam televisions. it is also intended for lower cost dtvs, those not considered high definition. progressive output is also available for double line-rate television displays, or for high resolution graphic content to be displayed on a computer monitor. the pnx8526 is designed in a high performance 0.12-micron process. the pnx8526 performs source decode functions, including - conditional access, mpeg2 transport stream de-mux, mpeg2 video decode, audio decode and processing, graphics generation, video processing, and image composition and display. a 32-bit 200 mhz vliw processor, referred to as the trimedia? 3200 cpu core (tm32 cpu), carries out the majority of media processing operations performed by the pnx8526. fixed func tion hardware will perform some operations that are not handled by the tm32 cpu. additionally, the pnx8526 supports a number of peripheral interfaces such as i 2 c, usb, ide and uart. other interfaces such as ieee-1284 and ethernet may be supported vi a super i/o devices that reside on a pci expansion bus. the expansion bus also provides for glueless interface to 8-bit wide slave devices, such as flash/rom, docsis modem, uarts, etc. an embedded mips processor (pr3940) running at 150 mhz is intended to run the os. (there is no direct support for an external processor; however, a cpu of any type may be connected to the pnx8526 via the pci interface.) this implies a complete cpu subsystem consisting of the cpu itself , local memory, and an interface to pci. the mips processor is primarily responsible for control functions and graphics-intensive operating systems, while the tm32 cpu is responsible for running all real-time media processing functions. all resources supported within the pnx8526 are accessible by both the mips processor and the tm32 cpu. the software documentation of the pnx8526 provides more details on the interaction between the mips and the tm32 cpu. the pnx8526 is intended to be used with a small companion ic, the pnx8510. this analog companion chip provides the majority of analog video and audio support for the output of the pnx8526. the pnx8510 companion is capable of simultaneously driving two video channels (6 dacs) and two stereo audio channels (4 dacs).
philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 2 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 2. features 200 mhz, 5 instruction/clock cycle 32-bi t vliw processing core (tm32 cpu) 150 mhz, mips pr3940 processing core external cpu support via pci support for multiple digital video (d1) input streams support for multiple mpeg2 or directv transport streams (parallel format) on-chip conditional access for dv b, des, multi2, cam, directv on-chip copy protection support for opencable? and atsc (nrss-b) simultaneous decode of two sd streams (mpeg2) or one hd mpeg stream (afd style hd-sd decode) simultaneous decode of two ac-3 or equivalent audio streams high performance 2d rendering and dma capability dual image composition/screen refresh en gines: four layer primary output, two layer secondary output multiple channel output to support watch/record and multi-room modes embedded 1394 link layer with 5c copy protection soft modem support via ssi interface 16, 32, and 64 mb unified memory architecture implemented with high speed sdram (166 mhz) system expansion capability vi a industry standard pci bus core peripherals (i 2 c, uart, usb, etc.) on the chip, other peripherals supported via third-party superio chip 3. applications advanced set top box (astb) digital television (dtv) 4. ordering information table 1: ordering information type number package name description version pnx8526eh hbga456 plastic thermal enhanced ball grid array package; 456 balls; body 35 x 35 x 1.8 mm; heatsink sot610-1 philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 3 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 5. block diagram i/o marked * can also function as general purpose serial i/o pins due to pin sharing either ai3 or ao3 can be active, not both fig 1. pnx8526 - block diagram handbook, full pagewidth mce540 12 vip1 656 1394 656 ts ts ts & 656 router dv1 656* dv2 656/ts dv3 656/ts i 2 s audio* i 2 s audio* spdif audio spdif audio ejtag debug vip2 msp1-2 msp3 ai1-3 ? uart1-2* uart3/sync serial i/f* gen. purpose i/o i 2 s (2x) jtag 27 mhz xtal smartcard1-2 usb host i/f (2 port) spdi aicp1 ts_out* dv_out1 656/hd/vga dv_out2 656 output mode aicp2 ao1-3 ? spdo tsdma mbs boot, reset, clock misc. i/o vmpg de (2d) dma tm-dbg pci 33 mhz, 32-bit pci 2.2 166 mhz, 64-bit wide sdram (includes nand/nor flash, ide drive & 68k peripheral capability) mmi 1394 phy tm32 media processor 5 issue, 200 mhz 32 kb i$ 16 kb 2-port d$ 128 32-bit regs pr3940 mips cpu 150 mhz 16 kb i$ 8 kb d$ r4k mmu philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 4 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 6. pinning information 6.1 pinning in the tables that follow the pnx8526 signals have been sorted by functional group. for quick reference, ta bl e 2 identifies each functional group and gives table location. 6.2 pin description all pad inputs and i/o have built-in pull-ups (~80 k ? ) and schmitt trigger input thresholds. (see ta b l e 19 for maximum ratings). fig 2. pin configuration handbook, halfpage pnx8526eh mdb852 a c e g j l n r u w aa ac ae b d f h k m p t v y ab ad af 2 4 6 8 101214161820222426 135791113151719212325 ball a1 index area table 2: signal groups functional group group name table/page number pci peripheral controller interface ta bl e 3 on page 5 misc miscellaneous system interface ta bl e 4 on page 7 mmi main memory interface ta bl e 5 on page 7 gpio general purpose input/output ta bl e 6 on page 9 com serial communication ta bl e 7 on page 10 usb universal serial bus ta bl e 8 on page 10 1394 ieee 1394 port ta bl e 9 on page 11 i 2 c-bus serial communications port ta bl e 10 on page 11 avif audio and video interface ta bl e 11 on page 11 dvb digital video bus ta bl e 12 on page 13 pll phase lock loop ta bl e 13 on page 14 pwr analog power and ground / digital power and ground connections ta bl e 14 on page 14 test test contacts ta bl e 15 on page 17 all pins pin descriptions in alpha/numeric order ta bl e 16 on page 18 philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 5 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. the following pins do not have pull-ups: xtali, pcix, analog pins, i 2 c, main memory interfac e, usb_dpx and usb_dmx. the following pins do not have schmitt trigger inputs: xtali, analog pins, usb_dpx and usb_dmx. table 3: peripheral controller interface (pci) # indicates multiplexed signal, see section 6.2.1 for more details. symbol pin type description alternate function ad[31] ab1 i/o multiplexed address or data bit 31 ad[30] ab2 i/o multiplexed address or data bit 30 ad[29] ab3 i/o multiplexed address or data bit 29 ad[28] ab4 i/o multiplexed address or data bit 28 ad[27] ac1 i/o multiplexed address or data bit 27 ad[26] ac2 i/o multiplexed address or data bit 26 ad[25] ac3 i/o multiplexed address or data bit 25 ad[24] ad2 i/o multiplexed address or data bit 24 ad[23] ae3 i/o multiplexed address or data bit 23 ad[22] af4 i/o multiplexed address or data bit 22 ad[21] ae4 i/o multiplexed address or data bit 21 ad[20] ad4 i/o multiplexed address or data bit 20 ad[19] ae5 i/o multiplexed address or data bit 19 ad[18] ad5 i/o multiplexed address or data bit 18 ad[17] ac5 i/o multiplexed address or data bit 17 ad[16] ac6 i/o multiplexed address or data bit 16 ad[15] ad8 i/o multiplexed address or data bit 15 ad[14] ac8 i/o multiplexed address or data bit 14 ad[13] af9 i/o multiplexed address or data bit 13 ad[12] ae9 i/o multiplexed address or data bit 12 ad[11] ad9 i/o multiplexed address or data bit 11 ad[10] ac9 i/o multiplexed address or data bit 10 ad[09] af10 i/o multiplexed address or data bit 9 ad[08] ae10 i/o multiplexed address or data bit 8 ad[07] ac10 i/o multiplexed address or data bit 7 ad[06] af11 i/o multiplexed address or data bit 6 ad[05] ae11 i/o multiplexed address or data bit 5 ad[04] ad11 i/o multiplexed address or data bit 4 ad[03] ac11 i/o multiplexed address or data bit 3 ad[02] ae12 i/o multiplexed address or data bit 2 ad[01] ad12 i/o multiplexed address or data bit 1 ad[00] ac12 i/o multiplexed address or data bit 0 c/ be[3] ad1 i/o multiplexed command or byte enable 3 c/ be[2] af5 i/o multiplexed command or byte enable 2 philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 6 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. c/ be[1] ae8 i/o multiplexed command or byte enable 1 c/ be[0] ad10 i/o multiplexed command or byte enable 0 clk aa1 i pci bus clock devsel af7 i/o device select is asserted when a target address is decoded and remains asserted to indicate that a target device is selected. frame af6 i/o frame is asserted to indicate start of bus transaction and remains asserted until final data phase begins. gnt y3 i/o arbitration grant is asserted to indicate access to the bus has been granted. this pin is an input when an external arbiter is used and an output when using the internal arbiter. gnt_a y4 i/o auxiliary arbitration grant_a is asserted to indicate bus access has been granted to an external pci master . used where internal arbiter is configured. # gnt_b aa4 i/o auxiliary arbitration grant_b is asserted to indicate bus access has been granted to an external pci master . used where internal arbiter is configured. # idsel af3 i/o initialization device select provides chip select during configuration read and write transactions. inta v4 i/o interrupt a is asserted to request an interrupt. this pin may be configured as an input if the internal pic is used, or as an output if the external interrupt controller is used. polarity in active low. irdy ae6 i/o initiator ready is asserted during writes to indicate valid data on ad[31:0]. also asserted during reads to indicate the target is prepared to accept data. wait states are insert ed until irdy and trdy are both asserted. pa r af8 i/o parity supports even parity across the pci address/da ta bus ad[31:0]) and command/ byte enable bus (c/ be [3:0]). the bus master drives par for address and write data phases. the target drives par for the read data phases. perr ad7 i/o parity error indicates data parity errors during all pci transactions except special cycle. req y2 i/o arbitration request on pci bus. reque st is an output when using an external arbiter and an input when using an internal arbiter. req_a aa2 i/o auxiliary arbitration req_a on pci bus. used in modes where internal arbiter is configured. # req_b aa3 i/o auxiliary arbitration req_b on pci bus. used in modes where internal arbiter is configured. # reset_in w3 i pci bus global reset serr ac7 i/o system error stop ae7 i/o stop is asserted to indicate a request from the target for the master to stop the current transmission. trdy ad6 i/o target ready is asserted during reads to indicate valid data on ad[31:0]. it is asserted during writes to indicate the target is prepared to accept data. wait states are inserted until irdy and trdy are both asserted. table 3: peripheral controller interface (pci) ?continued # indicates multiplexed signal, see section 6.2.1 for more details. symbol pin type description alternate function philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 7 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. table 4: misc. system interface (misc) # indicates multiplexed signal, see section 6.2.1 for more details. symbol pin type description alternate function xio_a25 ae13 i/o xio address bit 25 # xio_ack af13 i/o xio acknowledge (eeprom) # xio_sel[2] af12 i/o external i/o select2 # xio_sel[1] ac13 i/o external i/o select1 # xio_sel[0] ad13 i/o external i/o select0 # sys_rstn_out y1 o system reset output # table 5: main memory interface (mmi) # indicates multiplexed signal, see section 6.2.1 for more details. symbol pin type description alternate function ma[11] c22 o memory address bit 11 ma[10] b21 o memory address bit 10 ma[9] a21 o memory address bit 9 ma[8] c21 o memory address bit 8 ma[7] a20 o memory address bit 7 ma[6] c20 o memory address bit 6 ma[5] d18 o memory address bit 5 ma[4] d19 o memory address bit 4 ma[3] c19 o memory address bit 3 ma[2] d20 o memory address bit 2 ma[1] b20 o memory address bit 1 ma[0] d21 o memory address bit 0 md[63] m25 i/o memory data bit 63 md[62] m24 i/o memory data bit 62 md[61] m23 i/o memory data bit 61 md[60] l26 i/o memory data bit 60 md[59] l25 i/o memory data bit 59 md[58] l24 i/o memory data bit 58 md[57] l23 i/o memory data bit 57 md[56] k26 i/o memory data bit 56 md[55] k24 i/o memory data bit 55 md[54] k23 i/o memory data bit 54 md[53] j26 i/o memory data bit 53 md[52] j25 i/o memory data bit 52 md[51] j24 i/o memory data bit 51 md[50] j23 i/o memory data bit 50 md[49] h26 i/o memory data bit 49 md[48] h25 i/o memory data bit 48 md[47] h23 i/o memory data bit 47 philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 8 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. md[46] g26 i/o memory data bit 46 md[45] g25 i/o memory data bit 45 md[44] g24 i/o memory data bit 44 md[43] g23 i/o memory data bit 43 md[42] f26 i/o memory data bit 42 md[41] f25 i/o memory data bit 41 md[40] f24 i/o memory data bit 40 md[39] f23 i/o memory data bit 39 md[38] e25 i/o memory data bit 38 md[37] e24 i/o memory data bit 37 md[36] d25 i/o memory data bit 36 md[35] d26 i/o memory data bit 35 md[34] e23 i/o memory data bit 34 md[33] d24 i/o memory data bit 33 md[32] c25 i/o memory data bit 32 md[31] a18 i/o memory data bit 31 md[30] b18 i/o memory data bit 30 md[29] c18 i/o memory data bit 29 md[28] a19 i/o memory data bit 28 md[27] b17 i/o memory data bit 27 md[26] c17 i/o memory data bit 26 md[25] d17 i/o memory data bit 25 md[24] a16 i/o memory data bit 24 md[23] b16 i/o memory data bit 23 md[22] c16 i/o memory data bit 22 md[21] d16 i/o memory data bit 21 md[20] a15 i/o memory data bit 20 md[19] b15 i/o memory data bit 19 md[18] c15 i/o memory data bit 18 md[17] d15 i/o memory data bit 17 md[16] c14 i/o memory data bit 16 md[15] a14 i/o memory data bit 15 md[14] d14 i/o memory data bit 14 md[13] a13 i/o memory data bit 13 md[12] b13 i/o memory data bit 12 md[11] c13 i/o memory data bit 11 md[10] d13 i/o memory data bit 10 md[09] a12 i/o memory data bit 09 md[08] b12 i/o memory data bit 08 table 5: main memory interface (mmi) ?continued # indicates multiplexed signal, see section 6.2.1 for more details. symbol pin type description alternate function philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 9 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. md[07] c12 i/o memory data bit 07 md[06] a11 i/o memory data bit 06 md[05] b11 i/o memory data bit 05 md[04] d11 i/o memory data bit 04 md[03] a10 i/o memory data bit 03 md[02] c11 i/o memory data bit 02 md[01] b10 i/o memory data bit 01 md[00] c10 i/o memory data bit 00 mdqm[7] k25 o sdram control bit 7 mdqm[6] h24 o sdram control bit 6 mdqm[5] e26 o sdram control bit 5 mdqm[4] a24 o sdram control bit 4 mdqm[3] a17 o sdram control bit 3 mdqm[2] b14 o sdram control bit 2 mdqm[1] d12 o sdram control bit 1 mdqm[0] a9 o sdram control bit 0 mba[1] d22 o sdram bank select mba[0] b22 o sdram bank select mcke c23 o memory clock enable mclk[1] c26 o memory clock mclk[0] b19 o memory clock mcs a22 o memory chip select mras b23 o edodram row address strobe mcas a23 o memory column address select mwe b24 o memory write enable table 5: main memory interface (mmi) ?continued # indicates multiplexed signal, see section 6.2.1 for more details. symbol pin type description alternate function table 6: general purpose input/output (gpio) # indicates multiplexed signal, see section 6.2.1 for more details. symbol pin type description alternate function gpio[11] n26 i/o general purpose input/output bit 11 # gpio[10] n24 i/o general purpose input/output bit 10 # gpio[9] n23 i/o general purpose input/output bit 9 # gpio[8] m26 i/o general purpose input/output bit 8 # gpio[7] ae14 i/o general purpose input/output bit 7 # gpio[6] af14 i/o general purpose input/output bit 6 # gpio[5] ad14 i/o general purpose input/output bit 5 # gpio[4] ac14 i/o general purpose input/output bit 4 # gpio[3] c5 i/o general purpose input/output bit 3 # philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 10 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. gpio[2] b4 i/o general purpose input/output bit 2 # gpio[1] d5 i/o general purpose input/output bit 1 # gpio[0] c4 i/o general purpose input/output bit 0 # table 6: general purpose input/output (gpio) ?continued # indicates multiplexed signal, see section 6.2.1 for more details. symbol pin type description alternate function table 7: serial communication (com) # indicates multiplexed signal, see section 6.2.1 for more details. symbol pin type description alternate function ua1_tx u24 i/o uart1 transmit # ua1_rx u25 i/o uart1 receive # ua2_tx t23 i/o uart2 transmit # ua2_rx u26 i/o uart2 receive # ua2_rtsn t24 i/o uart2 request to send # ua2_ctsn t25 i/o uart2 clear to send # sc1_da t26 i/o smart card1 data sc1_cmd r23 o smart card1 command sc1_rst r24 o smart card1 reset sc1_offn r25 i smart card1 off sc1_scck r26 o smart card1 bit clock sc2_da p23 i/o smart card2 data sc2_cmd p24 o smart card2 command sc2_rst p26 o smart card2 reset sc2_offn p25 i smart card2 off sc2_scck n25 o smart card2 bit clock ssi_sclk_ctsn v1 i/o synchronous serial interface clock input # ssi_fs_rtsn v2 i/o synchronous serial interface frame sync # ssi_rxd u4 i/o synchronous serial interface receive # ssi_txd v3 i/o synchronous serial interface transmit # table 8: universal serial bus (usb) symbol pin type description usb_dp[1] a5 i/o data plus bit 1 usb_dp[0] b6 i/o data plus bit 0 usb_dm[0] c6 i/o data minus bit 0 usb_dm[1] d7 i/o data minus bit 1 usb_pwr w1 o usb port power on/off 0 = power on 1 = power off usb_ovrcur w2 i indicates over current being drawn by a usb device 0 = over current detected 1 = no over current philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 11 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. table 9: ieee 1394 port symbol pin type description phy_d[7] b9 i/o phy data bit 7. data is expected on pins 7:0 for 400 mb packets. phy_d[6] d10 i/o phy data bit 6. data is expected on pins 7:0 for 400 mb packets. phy_d[5] c9 i/o phy data bit 5. data is expected on pins 7:0 for 400 mb packets. phy_d[4] a8 i/o phy data bit 4. data is expected on pins 7:0 for 400 mb packets. phy_d[3] b8 i/o phy data bit 3. data is expected on pins 3:0 for 200 mb packets. phy_d[2] d9 i/o phy data bit 2. data is expected on pins 3:0 for 200 mb packets. phy_d[1] c8 i/o phy data bit 1. data is expected on pins 1:0 for 100 mb packets. phy_d[0] a7 i/o phy data bit 0. data is expected on pins 1:0 for 100 mb packets. phy_ctl[1] b7 i/o phy control bit 1. indicates the mode for data on the din port. phy_ctl[0] c7 i/o phy control bit 0. indicates the mode for data on the din port. phy_lreq b5 o used by the link to make bus requests and to access phy registers. this is a serial bus. a train of pulses is sent on this signal. phy_iso_n a6 i signals which type of isolation mode is used at the phy-link interface. 0 = this is 1394-1995 annex j type isolation. enables differentiator circuitry. 1 = direct connection or single capacitor isolation mode. this will disable the differentiator circuitry. clk_l1394 d8 i system clock. 49.152 mhz input table 10: serial communication port (i 2 c) symbol pin type description i2c1_scl d6 i/o serial communications port (i 2 c-bus) clock i2c1_sda a4 i/o serial communications port (i 2 c-bus) data i2c2_scl h1 i/o serial communications port (i 2 c-bus) clock i2c2_sda k4 i/o serial communications port (i 2 c-bus) data table 11: audio and video interface # indicates multiplexed signal, see section 6.2.1 for more details. symbol pin type description alternate function dv_out1[9] m2 o digital video output1, bit 9 for primary display channel from aicp dv_out1[8] m1 o digital video output1, bit 8 for primary display channel from aicp dv_out1[7] n4 o digital video output1, bit 7 for primary display channel from aicp dv_out1[6] n3 o digital video output1, bit 6 for primary display channel from aicp dv_out1[5] n1 o digital video output1, bit 5 for primary display channel from aicp dv_out1[4] n2 o digital video output1, bit 4 for primary display channel from aicp dv_out1[3] p2 o digital video output1, bit 3 for primary display channel from aicp dv_out1[2] p1 o digital video output1, bit 2 for primary display channel from aicp dv_out1[1] p4 o digital video output1, bit 1 for primary display channel from aicp dv_out1[0] p3 o digital video output1, bit 0 for primary display channel from aicp dv_out2[9] r2 o digital video output2, bit 9 for secondary display channel from aicp dv_out2[8] r4 o digital video output2, bit 8 for secondary display channel from aicp dv_out2[7] r3 o digital video output2, bit 7 for secondary display channel from aicp philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 12 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. dv_out2[6] t1 o digital video output2, bit 6 for secondary display channel from aicp dv_out2[5] t2 o digital video output2, bit 5 for secondary display channel from aicp dv_out2[4] t3 o digital video output2, bit 4 for secondary display channel from aicp dv_out2[3] u1 o digital video output2, bit 3 for secondary display channel from aicp dv_out2[2] t4 o digital video output2, bit 2 for secondary display channel from aicp dv_out2[1] u2 o digital video output2, bit 1 for secondary display channel from aicp dv_out2[0] u3 o digital video output2, bit 0 for secondary display channel from aicp dv_clk1 m3 o digital video clock1 for primary display channel from aicp dv_clk2 r1 o digital video clock2 for secondary display channel from aicp hsync l1 o horizontal sync for primary display vsync l2 i/o vertical sync for primary display blank m4 o blanking for primary display i2s_in1_osclk ad20 o audio in1oversample clock i2s_in1_sck ac19 i/o audio in1 serial clock i2s_in1_ws af21 i/o audio in1 word select i2s_in1_sd ae21 i audio in1 data i2s_in2_osclk ad21 o audio in2 oversample clock i2s_in2_sck ac20 i/o audio in2 serial clock i2s_in2_ws af22 i/o audio in2 word select i2s_in2_sd ae22 i audio in2 data i2s_io_osclk af15 i/o audio in/out oversample clock # i2s_io_sck ae15 i/o audio in/out serial clock # i2s_io_ws ac15 i/o audio in/out word select # i2s_io_sd[3] ad15 i/o audio in/out data bit 3 # i2s_io_sd[2] af16 i/o audio in/out data bit 2 # i2s_io_sd[1] ae16 i/o audio in/out data bit 1 # i2s_io_sd[0[ ad16 i/o audio in/out data bit 0 # i2s_out1_osclk k3 o audio out1 oversample clock i2s_out1_sck j1 i/o audio out1 serial clock i2s_out1_ws j3 i/o audio out1 word select i2s_out1_sd j2 o audio out1 data i2s_out2_osclk k2 o audio out2oversample clock # i2s_out2_sck l3 i/o audio out2 serial clock # i2s_out2_ws k1 i/o audio out2 word select # i2s_out2_sd l4 o audio out2 data # spdif_in af17 i multi-ch/spdif input spdif_out ac16 o multi-ch/spdif output table 11: audio and video interface ?continued # indicates multiplexed signal, see section 6.2.1 for more details. symbol pin type description alternate function philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 13 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. table 12: digital video bus # indicates multiplexed signal, see section 6.2.1 for more details. symbol pin type description alternate function dv1_data[9] ae17 i/o itu-656 vip data bit 9 (most significant bit) # dv1_data[8] ad17 i/o itu-656 vip data bit 8 # dv1_data[7] af18 i/o itu-656 vip data bit 7 # dv1_data[6] ac17 i/o itu-656 vip data bit 6 # dv1_data[5] ae18 i/o itu-656 vip data bit 5 # dv1_data[4] ad18 i/o itu-656 vip data bit 4 # dv1_data[3] af19 i/o itu-656 vip data bit 3 # dv1_data[2] ae19 i/o itu-656 vip data bit 2 # dv1_data[1] ac18 i/o itu-656 vip data bit 1 # dv1_data[0] ad19 i/o itu-656 vip data bit 0 (least significant bit) # dv1_valid af20 i/o itu-656 vip data valid # dv1_clk ae20 i/o itu-656 vip data clock # dv2_data[7] af23 i digital video transport stream2 data bit 7 # dv2_data[6] ac21 i digital video transport stream2 data bit 6 # dv2_data[5] ad22 i digital video transport stream2 data bit 5 # dv2_data[4] ae23 i digital video transport stream2 data bit 4 # dv2_data[3] ac22 i digital video transport stream2 data bit 3 # dv2_data[2] ad23 i digital video transport stream2 data bit 2 # dv2_data[1] ae24 i digital video transport stream2 data bit 1 # dv2_data[0] af24 i digital video transport stream2 data bit 0 # dv2_sop ad24 i digital video transport stream2 start of packet # dv2_err ad26 i digital video transport stream2 error # dv2_valid ad25 i digital video transport stream2 data valid # dv2_clk ac24 i digital video transport stream2 clock # dv3_data[7] w23 i digital video transport stream3 data bit 7 # dv3_data[6] y24 i digital video transport stream3 data bit 6 # dv3_data[5] y25 i digital video transport stream3 data bit 5 # dv3_data[4] y26 i digital video transport stream3 data bit 4 # dv3_data[3] w24 i digital video transport stream3 data bit 3 # dv3_data[2] v23 i digital video transport stream3 data bit 2 # dv3_data[1] w25 i digital video transport stream3 data bit 1 # dv3_data[0] w26 i digital video transport stream3 data bit 0 # dv3_sop v24 i digital video transport stream3 start of packet # dv3_err u23 i digital video transport stream3 error # dv3_valid v25 i digital video transport stream3 data valid # dv3_clk v26 i digital video transport stream3 clock # ts_data[7] ab23 i/o transport stream data bit 7 # ts_data[6] ac25 i/o transport stream data bit 6 # ts_data[5] ab24 i/o transport stream data bit 5 # philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 14 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. ts_data[4] aa23 i/o transport stream data bit 4 # ts_data[3] ac26 i/o transport stream data bit 3 # ts_data[2] ab25 i/o transport stream data bit 2 # ts_data[1] ab26 i/o transport stream data bit 1 # ts_data[0] y23 i/o transport stream data bit 0 # ts_sop aa24 i/o transport stream start of packet (parallel/serial) # ts_valid aa25 i/o transport stream data valid (parallel/serial) # ts_clk aa26 i/o transport stream clock (parallel/serial) # table 12: digital video bus ?continued # indicates multiplexed signal, see section 6.2.1 for more details. symbol pin type description alternate function table 13: phase lock loop (pll) symbol pin type description xtali c2 i pll reference crystal input xtalo d3 o pll reference crystal feedback driver pll_out w4 o general purpose pll clock output table 14: analog and digital power (pwr) symbol pin description v ddc1 ab18 system 1.26 volts v ddc1 ab17 system 1.26 volts v ddc1 ab14 system 1.26 volts v ddc1 ab13 system 1.26 volts v ddc1 ab12 system 1.26 volts v ddc1 ab9 system 1.26 volts v ddc1 ab8 system 1.26 volts v ddc1 n5 system 1.26 volts v ddc1 p5 system 1.26 volts v ddc1 u5 system 1.26 volts v ddc1 v5 system 1.26 volts v ddc1 k5 system 1.26 volts v ddc1 j5 system 1.26 volts v ddc1 e14 system 1.26 volts v ddc1 e13 system 1.26 volts v ddc1 e10 system 1.26 volts v ddc1 e9 system 1.26 volts v ddc1 e15 system 1.26 volts v ddc1 e18 system 1.26 volts v ddc1 e19 system 1.26 volts v ddc1 u22 system 1.26 volts v ddc1 v22 system 1.26 volts v ddc1 p22 system 1.26 volts philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 15 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. v ddc1 n22 system 1.26 volts v ddc1 k22 system 1.26 volts v ddc1 j22 system 1.26 volts v ddc1 d1 system 1.26 volts v ddc1 e2 system 1.26 volts v ddc1 e1 system 1.26 volts v ddc1 g4 system 1.26 volts v ddc1 f3 system 1.26 volts v ddc1 f2 system 1.26 volts v ddc1 f1 system 1.26 volts v ddc1 h4 system 1.26 volts v ddc1 g3 system 1.26 volts v ddc2 e4 system 1.26 volts (analog power 1.728 ghz pll) v ddc2 e3 system 1.26 volts (analog power 1.728 ghz pll) v ss d2 system ground (analog ground 1.728 ghz pll) v ss f4 system ground (analog ground 1.728 ghz pll) v dd1 ab6 system 3.3 volts v dd1 ab7 system 3.3 volts v dd1 ab10 system 3.3 volts v dd1 ab11 system 3.3 volts v dd1 ab16 system 3.3 volts v dd1 ab19 system 3.3 volts v dd1 ab20 system 3.3 volts v dd1 e12 system 3.3 volts v dd1 e11 system 3.3 volts v dd1 e8 system 3.3 volts v dd1 e7 system 3.3 volts v dd1 e16 system 3.3 volts v dd1 e17 system 3.3 volts v dd1 e20 system 3.3 volts v dd1 e21 system 3.3 volts v dd1 m22 system 3.3 volts v dd1 l22 system 3.3 volts v dd1 h22 system 3.3 volts v dd1 g22 system 3.3 volts v dd1 r22 system 3.3 volts v dd1 t22 system 3.3 volts v dd1 w22 system 3.3 volts v dd1 y22 system 3.3 volts v dd1 t5 system 3.3 volts v dd1 r5 system 3.3 volts table 14: analog and digital power (pwr) ?continued symbol pin description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 16 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. v dd1 m5 system 3.3 volts v dd1 l5 system 3.3 volts v dd1 w5 system 3.3 volts v dd1 y5 system 3.3 volts v dd2 g5 system 3.3 volts (cab) v dd2 h5 system 3.3 volts (cab) v dd3 ab15 system 3.3 volts (tm-pll) v ss af25 system ground v ss af26 system ground v ss ae26 system ground v ss ae25 system ground v ss ac23 system ground v ss ab22 system ground v ss ab21 system ground v ss aa22 system ground v ss f22 system ground v ss e22 system ground v ss d23 system ground v ss c24 system ground v ss b25 system ground v ss a25 system ground v ss a26 system ground v ss b26 system ground v ss l15 system ground v ss l14 system ground v ss l13 system ground v ss l12 system ground v ss l11 system ground v ss m11 system ground v ss n11 system ground v ss p11 system ground v ss r11 system ground v ss t11 system ground v ss t12 system ground v ss t13 system ground v ss r13 system ground v ss r14 system ground v ss t14 system ground v ss t15 system ground v ss t16 system ground v ss r16 system ground table 14: analog and digital power (pwr) ?continued symbol pin description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 17 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. v ss aa5 system ground v ss ab5 system ground v ss ac4 system ground v ss ad3 system ground v ss ae2 system ground v ss ae1 system ground v ss af1 system ground v ss af2 system ground v ss f5 system ground v ss e5 system ground v ss e6 system ground v ss d4 system ground v ss b2 system ground v ss a2 system ground v ss a1 system ground v ss b1 system ground v ss r15 system ground v ss r12 system ground v ss p12 system ground v ss p13 system ground v ss n13 system ground v ss n14 system ground v ss p14 system ground v ss p15 system ground v ss p16 system ground v ss n16 system ground v ss n15 system ground v ss n12 system ground v ss m12 system ground v ss m13 system ground v ss m14 system ground v ss l16 system ground v ss m16 system ground v ss m15 system ground table 15: test symbol pin type description dbg_tdi a3 i pr3940 debug port data in dbg_tdo b3 o pr3940 debug port data out dbg_tck c3 i pr3940 debug port clock dbg_tms c1 i pr3940 debug port mode select table 14: analog and digital power (pwr) ?continued symbol pin description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 18 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. jtag_trst g2 i jtag port reset jtag_tdi j4 i jtag data in jtag_tdo h2 o jtag data out jtag_tck g1 i jtag data clock jtag_tms h3 i jtag data mode select table 15: test ?continued symbol pin type description table 16: all pins symbol pin group type description v ss a1 pwr - system ground v ss a2 pwr - system ground dbg_tdi a3 test i pr3940 debug port data in i2c_sda a4 i 2 c-bus i/o serial communications port (i 2 c-bus) data usb_dp[1] a5 usb i/o data plus bit 1 phy_iso_n a6 1394 i signals type of isolation mode used at the phy-link interface. 0 = 1394-1995 annex j type isolation. enables differentiator circuitry. 1 = direct connection or single capacitor isolation mode. this will disable the differentiator circuitry. phy_d[0] a7 1394 i/o phy data bit 0. data is expected on pins 1:0 for 100 mb packets. phy_d[4] a8 1394 i/o phy data bit 4. data is expected on pins 7:0 for 400 mb packets. mdqm[0] a9 mmi o sdram control bit 0 md[03] a10 mmi i/o memory data bit 03 md[06] a11 mmi i/o memory data bit 06 md[09] a12 mmi i/o memory data bit 09 md[13] a13 mmi i/o memory data bit 13 md[15] a14 mmi i/o memory data bit 15 md[20] a15 mmi i/o memory data bit 20 md[24] a16 mmi i/o memory data bit 24 mdqm[3] a17 mmi o sdram control bit 3 md[31] a18 mmi i/o memory data bit 31 md[28] a19 mmi i/o memory data bit 28 ma[7] a20 mmi o memory address bit 7 ma[9] a21 mmi o memory address bit 9 mcs a22 mmi o memory chip select mcas a23 mmi o memory column address select mdqm[4] a24 mmi o sdram control bit 4 v ss a25 pwr - system ground v ss a26 pwr - system ground v ss b1 pwr - system ground v ss b2 pwr - system ground dbg_tdo b3 test o pr3940 debug port data out gpio[2] b4 gpio i/o general purpose input/output bit 2 philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 19 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. phy_lreq b5 1394 o used by the link to make bus requests and to access phy registers. this is a serial bus. a train of pulses is sent on this signal. usb_dp[0] b6 usb i/o data plus bit 0 phy_ctl[1] b7 1394 i/o phy control bit 1. indicates the mode for data on the din port. phy_d[3] b8 1394 i/o phy data bit 3. data is expected on pins 3:0 for 200 mb packets. phy_d[7] b9 1394 i/o phy data bit 7. data is expected on pins 7:0 for 400 mb packets. md[01] b10 mmi i/o memory data bit 01 md[05] b11 mmi i/o memory data bit 05 md[08] b12 mmi i/o memory data bit 08 md[12] b13 mmi i/o memory data bit 12 mdqm[2] b14 mmi o sdram control bit 2 md[19] b15 mmi i/o memory data bit 19 md[23] b16 mmi i/o memory data bit 23 md[27] b17 mmi i/o memory data bit 27 md[30] b18 mmi i/o memory data bit 30 mclk[0] b19 mmi o memory clock ma[1] b20 mmi o memory address bit 1 ma[10] b21 mmi o memory address bit 10 mba[0] b22 mmi o sdram bank select mras b23 mmi o edodram row address strobe mwe b24 mmi o memory write enable v ss b25 pwr - system ground v ss b26 pwr - system ground dbg_tms c1 test i pr3940 debug port mode select xtali c2 pll i pll reference crystal input dbg_tck c3 test i pr3940 debug port clock gpio[0] c4 gpio i/o general purpose input/output bit 0 gpio[3] c5 gpio i/o general purpose input/output bit 3 usb_dm[0] c6 usb i/o data minus bit 0 phy_ctl[0] c7 1394 i/o phy control bit 0. indicates the mode for data on the din port. phy_d[1] c8 1394 i/o phy data bit 1. data is expected on pins 1:0 for 100 mb packets. phy_d[5] c9 1394 i/o phy data bit 5. data is expected on pins 7:0 for 400 mb packets. md[00] c10 mmi i/o memory data bit 00 md[02] c11 mmi i/o memory data bit 02 md[07] c12 mmi i/o memory data bit 07 md[11] c13 mmi i/o memory data bit 11 md[16] c14 mmi i/o memory data bit 16 md[18] c15 mmi i/o memory data bit 18 md[22] c16 mmi i/o memory data bit 22 md[26] c17 mmi i/o memory data bit 26 md[29] c18 mmi i/o memory data bit 29 table 16: all pins ?continued symbol pin group type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 20 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. ma[3] c19 mmi o memory address bit 3 ma[6] c20 mmi o memory address bit 6 ma[8] c21 mmi o memory address bit 8 ma[11] c22 mmi o memory address bit 11 mcke c23 mmi o memory clock enable v ss c24 pwr - system ground md[32] c25 mmi i/o memory data bit 32 mclk[1] c26 mmi o memory clock v ddc d1 pwr - system 1.26 volts v ss d2 pwr - system ground (analog ground 1.728 ghz pll) xtalo d3 pll o pll reference crystal feedback driver v ss d4 pwr - system ground gpio[1] d5 gpio i/o general purpose input/output bit 1 i2c_scl d6 i 2 c-bus i/o serial communications port (i 2 c-bus) clock usb_dm[1] d7 usb i/o data minus bit 1 clk_l1394 d8 1394 i system clock. 49.152 mhz input phy_d[2] d9 1394 i/o phy data bit 2. data is expected on pins 3:0 for 200 mb packets. phy_d[6] d10 1394 i/o phy data bit 6. data is expected on pins 7:0 for 400 mb packets. md[04] d11 mmi i/o memory data bit 04 mdqm[1] d12 mmi o sdram control bit 1 md[10] d13 mmi i/o memory data bit 10 md[14] d14 mmi i/o memory data bit 14 md[17] d15 mmi i/o memory data bit 17 md[21] d16 mmi i/o memory data bit 21 md[25] d17 mmi i/o memory data bit 25 ma[5] d18 mmi o memory address bit 5 ma[4] d19 mmi o memory address bit 4 ma[2] d20 mmi o memory address bit 2 ma[0] d21 mmi o memory address bit 0 mba[1] d22 mmi o sdram bank select v ss d23 pwr - system ground md[33] d24 mmi i/o memory data bit 33 md[36] d25 mmi i/o memory data bit 36 md[35] d26 mmi i/o memory data bit 35 v ddc1 e1 pwr - system 1.26 volts v ddc1 e2 pwr - system 1.26 volts v ddc2 e3 pwr - system 1.26 volts (analog power 1.728 ghz pll) v ddc2 e4 pwr - system 1.26 volts (analog power 1.728 ghz pll) v ss e5 pwr - system ground v ss e6 pwr - system ground v dd1 e7 pwr - system 3.3 volts table 16: all pins ?continued symbol pin group type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 21 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. v dd1 e8 pwr - system 3.3 volts v ddc1 e9 pwr - system 1.26 volts v ddc1 e10 pwr - system 1.26 volts v dd1 e11 pwr - system 3.3 volts v dd1 e12 pwr - system 3.3 volts v ddc1 e13 pwr - system 1.26 volts v ddc1 e14 pwr - system 1.26 volts v ddc1 e15 pwr - system 1.26 volts v dd1 e16 pwr - system 3.3 volts v dd1 e17 pwr - system 3.3 volts v ddc1 e18 pwr - system 1.26 volts v ddc1 e19 pwr - system 1.26 volts v dd1 e20 pwr - system 3.3 volts v dd1 e21 pwr - system 3.3 volts v ss e22 pwr - system ground md[34] e23 mmi i/o memory data bit 34 md[37] e24 mmi i/o memory data bit 37 md[38] e25 mmi i/o memory data bit 38 mdqm[5] e26 mmi o sdram control bit 5 v ddc1 f1 pwr - system 1.26 volts v ddc1 f2 pwr - system 1.26 volts v ddc1 f3 pwr - system 1.26 volts v ss f4 pwr - system ground (analog ground 1.728 ghz pll) v ss f5 pwr - system ground v ss f22 pwr - system ground md[39] f23 mmi i/o memory data bit 39 md[40] f24 mmi i/o memory data bit 40 md[41] f25 mmi i/o memory data bit 41 md[42] f26 mmi i/o memory data bit 42 jtag_tck g1 test i jtag data clock jtag_trst g2 test i jtag port reset v ddc1 g3 pwr - system 1.26 volts v ddc1 g4 pwr - system 1.26 volts v dd2 g5 pwr - system 3.3 volts (cab) v dd1 g22 pwr - system 3.3 volts md[43] g23 mmi i/o memory data bit 43 md[44] g24 mmi i/o memory data bit 44 md[45] g25 mmi i/o memory data bit 45 md[46] g26 mmi i/o memory data bit 46 i2c2_scl h1 i 2 c-bus i/o serial communications port (i 2 c-bus) clock jtag_tdo h2 test o jtag data out table 16: all pins ?continued symbol pin group type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 22 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. jtag_tms h3 test i jtag data mode select v ddc1 h4 pwr - system 1.26 volts v dd2 h5 pwr - system 3.3 volts (cab) v dd1 h22 pwr - system 3.3 volts md[47] h23 mmi i/o memory data bit 47 mdqm[6] h24 mmi o sdram control bit 6 md[48] h25 mmi i/o memory data bit 48 md[49] h26 mmi i/o memory data bit 49 i2s_out1_sck j1 avif i/o audio out1 serial clock i2s_out1_sd j2 avif o audio out1 data i2s_out1_ws j3 avif i/o audio out1 word select jtag_tdi j4 test i jtag data in v ddc1 j5 pwr - system 1.26 volts v ddc1 j22 pwr - system 1.26 volts md[50] j23 mmi i/o memory data bit 50 md[51] j24 mmi i/o memory data bit 51 md[52] j25 mmi i/o memory data bit 52 md[53] j26 mmi i/o memory data bit 53 i2s_out2_ws k1 avif i/o audio out2 word select i2s_out2_osclk k2 avif o audio out2 oversample clock i2s_out1_osclk k3 avif o audio out1 oversample clock i2c2_sda k4 i 2 c-bus i/o serial communications port (i 2 c-bus) data v ddc1 k5 pwr - system 1.26 volts v ddc1 k22 pwr - system 1.26 volts md[54] k23 mmi i/o memory data bit 54 md[55] k24 mmi i/o memory data bit 55 mdqm[7] k25 mmi o sdram control bit 7 md[56] k26 mmi i/o memory data bit 56 hsync l1 avif o horizontal sync for primary display vsync l2 avif i/o vertical sync for primary display i2s_out2_sck l3 avif i/o audio out2 serial clock i2s_out2_sd l4 avif o audio out2 data v dd1 l5 pwr - system 3.3 volts v ss l11 pwr - system ground v ss l12 pwr - system ground v ss l13 pwr - system ground v ss l14 pwr - system ground v ss l15 pwr - system ground v ss l16 pwr - system ground v dd1 l22 pwr - system 3.3 volts md[57] l23 mmi i/o memory data bit 57 table 16: all pins ?continued symbol pin group type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 23 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. md[58] l24 mmi i/o memory data bit 58 md[59] l25 mmi i/o memory data bit 59 md[60] l26 mmi i/o memory data bit 60 dv_out1[8] m1 avif o digital video output1, bit 8 for primary display channel from aicp dv_out1[9] m2 avif o digital video output1, bit 9 for primary display channel from aicp dv_clk1 m3 avif o digital video clock1 for primary display channel from aicp blank m4 avif o blanking for primary display v dd1 m5 pwr - system 3.3 volts v ss m11 pwr - system ground v ss m12 pwr - system ground v ss m13 pwr - system ground v ss m14 pwr - system ground v ss m15 pwr - system ground v ss m16 pwr - system ground v dd1 m22 pwr - system 3.3 volts md[61] m23 mmi i/o memory data bit 61 md[62] m24 mmi i/o memory data bit 62 md[63] m25 mmi i/o memory data bit 63 gpio[8] m26 gpio i/o general purpose input/output bit 8 dv_out1[5] n1 avif o digital video output1, bit 5 for primary display channel from aicp dv_out1[4] n2 avif o digital video output1, bit 4 for primary display channel from aicp dv_out1[6] n3 avif o digital video output1, bit 6 for primary display channel from aicp dv_out1[7] n4 avif o digital video output1, bit 7 for primary display channel from aicp v ddc1 n5 pwr - system 1.26 volts v ss n11 pwr - system ground v ss n12 pwr - system ground v ss n13 pwr - system ground v ss n14 pwr - system ground v ss n15 pwr - system ground v ss n16 pwr - system ground v ddc1 n22 pwr - system 1.26 volts gpio[9] n23 gpio i/o general purpose input/output bit 9 gpio[10] n24 gpio i/o general purpose input/output bit 10 sc2_scck n25 com o smart card2 bit clock gpio[11] n26 gpio i/o general purpose input/output bit 11 dv_out1[2] p1 avif o digital video output1, bit 2 for primary display channel from aicp dv_out1[3] p2 avif o digital video output1, bit 3 for primary display channel from aicp dv_out1[0] p3 avif o digital video output1, bit 0 for primary display channel from aicp dv_out1[1] p4 avif o digital video output1, bit 1 for primary display channel from aicp v ddc1 p5 pwr - system 1.26 volts v ss p11 pwr - system ground table 16: all pins ?continued symbol pin group type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 24 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. v ss p12 pwr - system ground v ss p13 pwr - system ground v ss p14 pwr - system ground v ss p15 pwr - system ground v ss p16 pwr - system ground v ddc1 p22 pwr - system 1.26 volts sc2_da p23 com i/o smart card2 data sc2_cmd p24 com o smart card2 command sc2_offn p25 com i smart card2 off sc2_rst p26 com o smart card2 reset dv_clk2 r1 avif o digital video clock2 for secondary display channel from aicp dv_out2[9] r2 avif o digital video output2, bit 9 for secondary display channel from aicp dv_out2[7] r3 avif o digital video output2, bit 7 for secondary display channel from aicp dv_out2[8] r4 avif o digital video output2, bit 8 for secondary display channel from aicp v dd1 r5 pwr - system 3.3 volts v ss r11 pwr - system ground v ss r12 pwr - system ground v ss r13 pwr - system ground v ss r14 pwr - system ground v ss r15 pwr - system ground v ss r16 pwr - system ground v dd1 r22 pwr - system 3.3 volts sc1_cmd r23 com o smart card1 command sc1_rst r24 com o smart card1 reset sc1_offn r25 com i smart card1 off sc1_scck r26 com o smart card1 bit clock dv_out2[6] t1 avif o digital video output2, bit 6 for secondary display channel from aicp dv_out2[5] t2 avif o digital video output2, bit 5 for secondary display channel from aicp dv_out2[4] t3 avif o digital video output2, bit 4 for secondary display channel from aicp dv_out2[2] t4 avif o digital video output2, bit 2 for secondary display channel from aicp v dd1 t5 pwr - system 3.3 volts v ss t11 pwr - system ground v ss t12 pwr - system ground v ss t13 pwr - system ground v ss t14 pwr - system ground v ss t15 pwr - system ground v ss t16 pwr - system ground v dd1 t22 pwr - system 3.3 volts ua2_tx t23 com i/o uart2 transmit ua2_rtsn t24 com i/o uart2 request to send ua2_ctsn t25 com i/o uart2 clear to send table 16: all pins ?continued symbol pin group type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 25 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. sc1_da t26 com i/o smart card1 data dv_out2[3] u1 avif o digital video output2, bit 3 for secondary display channel from aicp dv_out2[1] u2 avif o digital video output2, bit 1 for secondary display channel from aicp dv_out2[0] u3 avif o digital video output2, bit 0 for secondary display channel from aicp ssi_rxd u4 com i/o synchronous serial interface receive v ddc1 u5 pwr - system 1.26 volts v ddc1 u22 pwr - system 1.26 volts dv3_err u23 dvb i digital video transport stream3 error ua1_tx u24 com i/o uart1 transmit ua1_rx u25 com i/o uart1 receive ua2_rx u26 com i/o uart2 receive ssi_sclk_ctsn v1 com i/o synchronous serial interface clock ssi_fs_rtsn v2 com i/o synchronous serial interface frame sync ssi_txd v3 com i/o synchronous serial interface transmit inta v4 pci i/o interrupt acknowledge is asserted to request an interrupt. v ddc1 v5 pwr - system 1.26 volts v ddc1 v22 pwr - system 1.26 volts dv3_data[2] v23 dvb i digital video transport stream3 data bit 2 dv3_sop v24 dvb i digital video transport stream3 start of packet dv3_valid v25 dvb i digital video transport stream3 data valid dv3_clk v26 dvb i digital video transport stream3 clock usb_pwr w1 usb o usb port power on/off 0 = power on 1 = power off usb_ovrcur w2 usb i indicates over current being drawn by a usb device: 0 = over current detected 1 = no over current reset_in w3 pci i pci bus global reset pll_out w4 pll o general purpose pll clock output v dd1 w5 pwr - system 3.3 volts v dd1 w22 pwr - system 3.3 volts dv3_data[7] w23 dvb i digital video transport stream3 data bit 7 dv3_data[3] w24 dvb i digital video transport stream3 data bit 3 dv3_data[1] w25 dvb i digital video transport stream3 data bit 1 dv3_data[0] w26 dvb i digital video transport stream3 data bit 0 sys_rstn_out y1 misc o system reset output req y2 pci i/o arbitration request on pci bus. request is an output when using an external arbiter and an input when using an internal arbiter. gnt y3 pci i/o arbitration grant is asserted to indicate access to the bus has been granted. this pin is an input when an external arbiter is used and an output when using the internal arbiter. table 16: all pins ?continued symbol pin group type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 26 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. gnt_a y4 pci i/o auxiliary arbitration grant_a is asserted to indicate bus access has been granted to an external pci master. used where internal arbiter is configured. v dd1 y5 pwr - system 3.3 volts v dd1 y22 pwr - system 3.3 volts ts_data[0] y23 dvb i/o transport stream data bit 0 dv3_data[6] y24 dvb i digital video transport stream3 data bit 6 dv3_data[5] y25 dvb i digital video transport stream3 data bit 5 dv3_data[4] y26 dvb i digital video transport stream3 data bit 4 clk aa1 pci i pci bus clock req_a aa2 pci i/o auxiliary arbitration req_a on pci bus. used in modes where internal arbiter is configured. req_b aa3 pci i/o auxiliary arbitration req_b on pci bus. used in modes where internal arbiter is configured. gnt_b aa4 pci i/o auxiliary arbitration grant_b is asserted to indi cate bus access has been granted to an external pci master. used where internal arbiter is configured. v ss aa5 pwr - system ground v ss aa22 pwr - system ground ts_data[4] aa23 dvb i/o transport stream data bit 4 ts_sop aa24 dvb i/o transport stream start of packet (parallel/serial) ts_valid aa25 dvb i/o transport stream data valid (parallel/serial) ts_clk aa26 dvb i/o transport stream clock (parallel/serial) ad[31] ab1 pci i/o multiplexed address or data bit 31 ad[30] ab2 pci i/o multiplexed address or data bit 30 ad[29] ab3 pci i/o multiplexed address or data bit 29 ad[28] ab4 pci i/o multiplexed address or data bit 28 v ss ab5 pwr - system ground v dd1 ab6 pwr - system 3.3 volts v dd1 ab7 pwr - system 3.3 volts v ddc1 ab8 pwr - system 1.26 volts v ddc1 ab9 pwr - system 1.26 volts v dd1 ab10 pwr - system 3.3 volts v dd1 ab11 pwr - system 3.3 volts v ddc1 ab12 pwr - system 1.26 volts v ddc1 ab13 pwr - system 1.26 volts v ddc1 ab14 pwr - system 1.26 volts v dd1 ab15 pwr - system 3.3 volts (tm-pll) v dd3 ab16 pwr - system 3.3 volts v ddc1 ab17 pwr - system 1.26 volts v ddc1 ab18 pwr - system 1.26 volts table 16: all pins ?continued symbol pin group type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 27 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. v dd1 ab19 pwr - system 3.3 volts v dd1 ab20 pwr - system 3.3 volts v ss ab21 pwr - system ground v ss ab22 pwr - system ground ts_data[7] ab23 dvb i/o transport stream data bit 7 ts_data[5] ab24 dvb i/o transport stream data bit 5 ts_data[2] ab25 dvb i/o transport stream data bit 2 ts_data[1] ab26 dvb i/o transport stream data bit 1 ad[27] ac1 pci i/o multiplexed address or data bit 27 ad[26] ac2 pci i/o multiplexed address or data bit 26 ad[25] ac3 pci i/o multiplexed address or data bit 25 v ss ac4 pwr - system ground ad[17] ac5 pci i/o multiplexed address or data bit 17 ad[16] ac6 pci i/o multiplexed address or data bit 16 serr ac7 pci i/o system error ad[14] ac8 pci i/o multiplexed address or data bit 14 ad[10] ac9 pci i/o multiplexed address or data bit 10 ad[07] ac10 pci i/o multiplexed address or data bit 7 ad[03] ac11 pci i/o multiplexed address or data bit 3 ad[00] ac12 pci i/o multiplexed address or data bit 0 xio_sel[1] ac13 misc i/o external i/o select1 gpio[4] ac14 gpio i/o general purpose input/output bit 4 i2s_io_ws ac15 avif i/o audio in/out word select spdif_out ac16 avif o multi-channel/spdif output dv1_data[6] ac17 dvb i/o itu-656 vip data bit 6 dv1_data[1] ac18 dvb i/o itu-656 vip data bit 1 i2s_in1_sck ac19 avif i/o audio in1 serial clock i2s_in2_sck ac20 avif i/o audio in2 serial clock dv2_data[6] ac21 dvb i digital video transport stream2 data bit 6 dv2_data[3] ac22 dvb i digital video transport stream2 data bit 3 v ss ac23 pwr - system ground dv2_clk ac24 dvb i digital video transport stream2 clock ts_data[6] ac25 dvb i/o transport stream data bit 6 ts_data[3] ac26 dvb i/o transport stream data bit 3 c/ be[3] ad1 pci i/o multiplexed command or byte enable 3 ad[24] ad2 pci i/o multiplexed address or data bit 24 v ss ad3 pwr - system ground ad[20] ad4 pci i/o multiplexed address or data bit 20 ad[18] ad5 pci i/o multiplexed address or data bit 18 table 16: all pins ?continued symbol pin group type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 28 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. trdy ad6 pci i/o parity error indicates data parity errors during all pci transactions except special cycle. perr ad7 pci i/o parity error indicates data parity errors during all pci transactions except special cycle. ad[15] ad8 pci i/o multiplexed address or data bit 15 ad[11] ad9 pci i/o multiplexed address or data bit 11 c/ be[0] ad10 pci i/o multiplexed command or byte enable 0 ad[04] ad11 pci i/o multiplexed address or data bit 4 ad[01] ad12 pci i/o multiplexed address or data bit 1 xio_sel[0] ad13 misc i/o external i/o select0 gpio[5] ad14 gpio i/o general purpose input/output bit 5 i2s_io_sd[3] ad15 avif i/o audio in/out data bit 3 i2s_io_sd[0] ad16 avif i/o audio in/out data bit 0 dv1_data[8] ad17 dvb i/o itu-656 vip data bit 8 dv1_data[4] ad18 dvb i/o itu-656 vip data bit 4 dv1_data[0] ad19 dvb i/o itu-656 vip data bit 0 (least significant bit) i2s_in1_osclk ad20 avif o audio in1 oversample clock i2s_in2_osclk ad21 avif o audio in2 oversample clock dv2_data[5] ad22 dvb i digital video transport stream2 data bit 5 dv2_data[2] ad23 dvb i digital video transport stream2 data bit 2 dv2_sop ad24 dvb i digital video transport stream2 start of packet dv2_valid ad25 dvb i digital video transport stream2 data valid dv2_err ad26 dvb i digital video transport stream2 error v ss ae1 pwr - system ground v ss ae2 pwr - system ground ad[23] ae3 pci i/o multiplexed address or data bit 23 ad[21] ae4 pci i/o multiplexed address or data bit 21 ad[19] ae5 pci i/o multiplexed address or data bit 19 irdy ae6 pci i/o initiator ready is asserted during writes to indicate valid data on ad[31:0]. also asserted during reads to indicate the target is prepared to accept data. wait states are inse rted until irdy and trdy are both asserted. stop ae7 pci i/o stop is asserted to indicate a request from the target for the master to stop the current transmission. c/ be[1] ae8 pci i/o multiplexed command or byte enable 1 ad[12] ae9 pci i/o multiplexed address or data bit 12 ad[08] ae10 pci i/o multiplexed address or data bit 8 ad[05] ae11 pci i/o multiplexed address or data bit 5 ad[02] ae12 pci i/o multiplexed address or data bit 2 xio_a25 ae13 misc i/o xio address bit 25 gpio[7] ae14 gpio i/o general purpose input/output bit 7 table 16: all pins ?continued symbol pin group type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 29 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. i2s_io_sck ae15 avif i/o audio in/out serial clock i2s_io_sd[1] ae16 avif i/o audio in/out data bit 1 dv1_data[9] ae17 dvb i/o itu-656 vip data bit 9 (most significant bit) dv1_data[5] ae18 dvb i/o itu-656 vip data bit 5 dv1_data[2] ae19 dvb i/o itu-656 vip data bit 2 dv1_clk ae20 dvb i/o itu-656 vip data clock i2s_in1_sd ae21 avif i audio in1 data i2s_in2_sd ae22 avif i audio in2 data dv2_data[4] ae23 dvb i digital video transport stream2 data bit 4 dv2_data[1] ae24 dvb i digital video transport stream2 data bit 1 v ss ae25 pwr - system ground v ss ae26 pwr - system ground v ss af1 pwr - system ground v ss af2 pwr - system ground idsel af3 pci i/o initialization device select provides chip select during configuration read and write transactions. ad[22] af4 pci i/o multiplexed address or data bit 22 c/ be[2] af5 pci i/o multiplexed command or byte enable 2 frame af6 pci i/o frame is asserted to indicate start of bus transaction and remains asserted until final data phase begins. devsel af7 pci i/o device select is asserted when a target address is decoded and remains asserted to indicate that a target device is selected. pa r af8 pci i/o parity supports even parity across the pci address/data bus ad[31:0]) and command/ byte enable bus (c/ be [3:0]). bus master drives par for address and write data phases. target drives par for the read data phases. ad[13] af9 pci i/o multiplexed address or data bit 13 ad[09] af10 pci i/o multiplexed address or data bit 9 ad[06] af11 pci i/o multiplexed address or data bit 6 xio_sel[2] af12 misc i/o external i/o select2 xio_ack af13 misc i/o xio acknowledge (eeprom) gpio[6] af14 gpio i/o general purpose input/output bit 6 i2s_io_osclk af15 avif i/o audio in/out oversample clock i2s_io_sd[2] af16 avif i/o audio in/out data bit 2 spdif_in af17 avif i multi-ch/spdif input dv1_data[7] af18 dvb i/o itu-656 vip data bit 7 dv1_data[3] af19 dvb i/o itu-656 vip data bit 3 dv1_valid af20 dvb i/o itu-656 vip data valid i2s_in1_ws af21 avif i/o audio in1 word select i2s_in2_ws af22 avif i/o audio in2 word select dv2_data[7] af23 dvb i digital video transport stream2 data bit 7 table 16: all pins ?continued symbol pin group type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 30 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 6.2.1 multi-function pins ta bl e 17 identifies and describes alternate signals that are available in the pnx8526. in section 6.2 alternate signals are also identified by a hash (#) within each functional group of signals. remark: the pnx8526 has a number of general purpose input output (gpio) pins. some of these are dedicated pins, while others are configured as alternate signals on multi function pins, as described below. th e standard function of these pins may not be required in some system configurations. for more details on gpio functionality, see pnx8526 user manual, chapter 10 . dv2_data[0] af24 dvb i digital video transport stream2 data bit 0 v ss af25 pwr - system ground v ss af26 pwr - system ground table 16: all pins ?continued symbol pin group type description table 17: multiplexed (mux) pins in this table,?type? reflects mux pin function only. a pin may have other ?type? capabilities as noted in its functional group. see section 6.2 for more details. pin mux contacts primary signal and alternate function type description af15 i2s_io_osclk i/o audio in/out oversample clock gpio 45 i/o general purpose input/output 45 ae15 i2s_io_sck i/o audio in/out serial clock gpio 46 i/o general purpose input/output 46 ac15 i2s_io_ws i/o audio in/out word select gpio 47 i/o general purpose input/output 47 ad15 i2s_io_sd[3] i/o audio in/out data bit 3 gpio 51 i/o general purpose input/output 51 af16 i2s_io_sd[2] i/o audio in/out data bit 2 gpio 50 i/o general purpose input/output 50 ae16 i2s_io_sd[1] i/o audio in/out data bit 1 gpio 49 i/o general purpose input/output 49 ad16 i2s_io_sd[0] i/o audio in/out data bit 0 gpio 48 i/o general purpose input/output 48 r1 dv_clk2 o digital video clock2 for secondary display channel from aicp r2 dv_out2[9] o digital video output2, bit 9 for secondary display channel from aicp spy_out[9] o spy micro-architecture output signal, bit 9 r4 dv_out2[8] o digital video output2, bit 8 for secondary display channel from aicp spy_out[8] o spy micro-architecture output signal, bit 8 dsu_tpc1 o debug support unit1, tpc1 r3 dv_out2[7] o digital video output2, bit 7 for secondary display channel from aicp spy_out[7] o spy micro-architecture output signal, bit 7 dsu_tpc0 o debug support unit0, tpc0 philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 31 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. t1 dv_out2[6] o digital video output2, bit 6 for secondary display channel from aicp spy_out[6] o spy micro-architecture output signal, bit 6 dsu_pcst1[2] o program counter status1, bit 2 t2 dv_out2[5] o digital video output2, bit 5 for secondary display channel from aicp spy_out[5] o spy micro-architecture output signal, bit 5 dsu_pcst1[1] o program counter status1, bit 1 t3 dv_out2[4] o digital video output2, bit 4 for secondary display channel from aicp spy_out[4] o spy micro-architecture output signal, bit 4 dsu_pcst1[0] o program counter status1, bit 0 u1 dv_out2[3] o digital video output2, bit 3 for secondary display channel from aicp spy_out[3] o spy micro-architecture output signal, bit 3 dsu_pcst0[2] o program counter status0, bit 2 t4 dv_out2[2] o digital video output2, bit 2 for secondary display channel from aicp spy_out[2] o spy micro-architecture output signal, bit 2 dsu_pcst0[1] o program counter status0, bit 1 u2 dv_out2[1] o digital video output2, bit 1 for secondary display channel from aicp spy_out[1] o spy micro-architecture output signal, bit 1 dsu_pcst0[0] o program counter status0, bit 0 u3 dv_out2[0] o digital video output2, bit 0 for secondary display channel from aicp spy_out[0] o spy micro-architecture output signal, bit 0 dsu_clk o debug support unit clock k2 i2s_out2_osclk o audio out2 oversample clock dv_out[20] o aicp rgb data bit 20 spy_out[11] o spy micro-architecture output signal, bit 11 l3 i2s_out2_sck i/o audio out2 serial clock dv_out[21] o aicp rgb data bit 21 spy_out[10] o spy micro-architecture output signal, bit 10 k1 i2s_out2_ws i/o audio out2 word select dv_out[22] o aicp rgb data bit 22 dbg_ext_stop i external stop request signal l4 i2s_out2_sd o audio out2 data dv_out[23] o aicp rgb data bit 23 (most significant bit) clk_spy o spy micro-architecture clock output signal ae17 dv1_data[9] i itu-656 vip data bit 9 (most significant bit) gpio 42 i/o general purpose input/output 42 ad17 dv1_data[8] i itu-656 vip data bit 8 gpio 41 i/o general purpose input/output 41 table 17: multiplexed (mux) pins ?continued in this table,?type? reflects mux pin function only. a pin may have other ?type? capabilities as noted in its functional group. see section 6.2 for more details. pin mux contacts primary signal and alternate function type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 32 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. af18 dv1_data[7] i itu-656 vip data bit 7 gpio 40 i/o general purpose input/output 40 ac17 dv1_data[6] i itu-656 vip data bit 6 gpio 39 i/o general purpose input/output 39 ae18 dv1_data[5] i itu-656 vip data bit 5 gpio 38 i/o general purpose input/output 38 ad18 dv1_data[4] i itu-656 vip data bit 4 gpio 37 i/o general purpose input/output 37 af19 dv1_data[3] i itu-656 vip data bit 3 gpio 36 i/o general purpose input/output 36 ae19 dv1_data[2] i itu-656 vip data bit 2 gpio 35 i/o general purpose input/output 35 ac18 dv1_data[1] i itu-656 vip data bit 1 gpio 34 i/o general purpose input/output 34 ad19 dv1_data[0] i itu-656 vip data bit 0 (least significant bit) gpio 33 i/o general purpose input/output 33 af20 dv1_valid i itu-656 vip data valid gpio 44 i/o general purpose input/output 44 ae20 dv1_clk i itu-656 vip data clock gpio 43 i/o general purpose input/output 43 af23 dv2_data[7] i digital video transport stream2 data bit 7 vip[9] i itu-656 vip data bit 9 (most significant bit) ac21 dv2_data[6] i digital video transport stream2 data bit 6 vip[8] i itu-656 vip data bit 8 tss_data2 i digital video transport stream2 serial data2 ad22 dv2_data[5] i digital video transport stream2 data bit 5 vip[7] i itu-656 vip data bit 7 tss_sop2 i digital video transport stream2 serial start of packet2 ae23 dv2_data[4] i digital video transport stream2 data bit 4 vip[6] i itu-656 vip data bit 6 tss_err2 i digital video transport stream2 serial error2 ac22 dv2_data[3] i digital video transport stream2 data bit 3 vip[5] i itu-656 vip data bit 5 tss_valid2 i digital video transport stream2 serial valid2 ad23 dv2_data[2] i digital video transport stream2 data bit 2 vip[4] i itu-656 vip data bit 4 tss_clk2 i digital video transport stream2 serial clock2 table 17: multiplexed (mux) pins ?continued in this table,?type? reflects mux pin function only. a pin may have other ?type? capabilities as noted in its functional group. see section 6.2 for more details. pin mux contacts primary signal and alternate function type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 33 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. ae24 dv2_data[1] i digital video transport stream2 data bit 1 vip[3] i itu-656 vip data bit 3 af24 dv2_data[0] i digital video transport stream2 data bit 0 vip[2] i itu-656 vip data bit 2 tss_data1 i digital video transport stream2 serial data1 ad24 dv2_sop i digital video transport stream2 start of packet vip[1] i itu-656 vip data bit 1 tss_sop1 i digital video transport stream2 serial start of packet1 ad26 dv2_err i digital video transport stream2 error vip[0] i itu-656 vip data bit 0 (least significant bit) tss_err1 i digital video transport stream2 serial error1 ad25 dv2_valid i digital video transport stream2 data valid vip_valid i itu-656 vip data valid tss_valid1 i digital video transport stream2 serial valid1 ac24 dv2_clk i digital video transport stream2 clock vip_clk i itu-656 vip data clock tss_clk1 i digital video transport stream2 serial clock1 w23 dv3_data[7] i digital video transport stream3 data bit 7 vip[9] i itu-656 vip data bit 9 (most significant bit) y24 dv3_data[6] i digital video transport stream3 data bit 6 vip[8] i itu-656 vip data bit 8 tss_data2 i digital video transport stream3 serial data2 y25 dv3_data[5] i digital video transport stream3 data bit 5 vip[7] i itu-656 vip data bit 7 tss_sop2 i digital video transport stream3 serial start of packet2 y26 dv3_data[4] i digital video transport stream3 data bit 4 vip[6] i itu-656 vip data bit 6 tss_err2 i digital video transport stream3 serial error2 w24 dv3_data[3] i digital video transport stream3 data bit 3 vip[5] i itu-656 vip data bit 5 tss_valid2 i digital video transport stream3 serial valid2 v23 dv3_data[2] i digital video transport stream3 data bit 2 vip[4] i itu-656 vip data bit 4 tss_clk2 i digital video transport stream3 serial clock2 w25 dv3_data[1] i digital video transport stream3 data bit 1 vip[3] i itu-656 vip data bit 3 table 17: multiplexed (mux) pins ?continued in this table,?type? reflects mux pin function only. a pin may have other ?type? capabilities as noted in its functional group. see section 6.2 for more details. pin mux contacts primary signal and alternate function type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 34 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. w26 dv3_data[0] i digital video transport stream3 data bit 0 vip[2] i itu-656 vip data bit 2 tss_data1 i digital video transport stream3 serial data1 v24 dv3_sop i digital video transport stream3 start of packet vip[1] i itu-656 vip data bit 1 tss_sop1 i digital video transport stream3 serial start of packet1 u23 dv3_err i digital video transport stream3 error vip[0] i itu-656 vip data bit 0 (least significant bit) tss_err1 i digital video transport stream3 serial error1 v25 dv3_valid i digital video transport stream3 data valid vip_valid i itu-656 vip data valid tss_valid1 i digital video transport stream3 serial valid1 v26 dv3_clk i digital video transport stream3 clock vip_clk i itu-656 vip data clock tss_clk1 i digital video transport stream3 serial clock1 ab23 ts_data[7] o transport stream data bit 7 gpio 29 i/o general purpose input/output 29 ac25 ts_data[6] o transport stream data bit 6 gpio 28 i/o general purpose input/output 28 ab24 ts_data[5] o transport stream data bit 5 gpio 27 i/o general purpose input/output 27 aa23 ts_data[4] o transport stream data bit 4 gpio 26 i/o general purpose input/output 26 ac26 ts_data[3] o transport stream data bit 3 gpio 25 i/o general purpose input/output 25 ab25 ts_data[2] o transport stream data bit 2 gpio 24 i/o general purpose input/output 24 ab26 ts_data[1] o transport stream data bit 1 gpio 23 i/o general purpose input/output 23 y23 ts_data[0] o transport stream data bit 0 gpio 22 i/o general purpose input/output 22 ts_sd o transport stream serial data out aa24 ts_sop o transport stream start of packet (parallel/serial) gpio 31 i/o general purpose input/output 31 aa25 ts_valid o transport stream data valid (parallel/serial) gpio 32 i/o general purpose input/output 32 aa26 ts_clk o transport stream clock (parallel/serial) gpio 30 i/o general purpose input/output 30 table 17: multiplexed (mux) pins ?continued in this table,?type? reflects mux pin function only. a pin may have other ?type? capabilities as noted in its functional group. see section 6.2 for more details. pin mux contacts primary signal and alternate function type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 35 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. aa2 pci_req_a * [1] i/o auxiliary arbitration req_a on pci bus. used in modes where internal arbiter is configured. gpio 57 i/o general purpose input/output 57 aa3 pci_req_b * i/o auxiliary arbitration req_b on pci bus. used in modes where internal arbiter is configured. gpio 58 i/o general purpose input/output 58 y4 pci_gnt_a * i/o auxiliary arbitration grant_a is asserted to indicate bus access has been granted to an external pci master. used where internal arbiter is configured. gpio 59 i/o general purpose input/output 59 aa4 pci_gnt_b * i/o auxiliary arbitration grant_b is asserted to indicate bus access has been granted to an external pci master. used where internal arbiter is configured. gpio 60 i/o general purpose input/output 60 af12 xio_sel[2] * o external mmio select 2 gpio 54 i/o general purpose input/output 54 ac13 xio_sel[1] * o external mmio select 1 gpio 53 i/o general purpose input/output 53 ad13 xio_sel[0] * o external mmio select 0 gpio 52 i/o general purpose input/output 52 af13 xio_ack * i xio acknowledge (eeprom) gpio 55 i/o general purpose input/output 55 ae13 xio_a25 * o xio address bit 25 gpio 56 i/o general purpose input/output 56 u24 ua1_tx o uart1 transmit gpio 12 i/o general purpose input/output 12 u25 ua1_rx i uart1 receive gpio 13 i/o general purpose input/output 13 t23 ua2_tx o uart2 transmit gpio 14 i/o general purpose input/output 14 u26 ua2_rx i uart2 receive icam1_setvpp o icam1 vpp** [2] gpio 15 i/o general purpose input/output 15 t24 ua2_rtsn o uart2 request to send icam1_c8 i icam1 c8** gpio 16 i/o general purpose input/output 16 t25 ua2_ctsn i uart2 clear to send icam1_c4 i/o icam1 c4 gpio 17 i/o general purpose input/output 17 table 17: multiplexed (mux) pins ?continued in this table,?type? reflects mux pin function only. a pin may have other ?type? capabilities as noted in its functional group. see section 6.2 for more details. pin mux contacts primary signal and alternate function type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 36 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. v1 ssi_sclk_ctsn i synchronous serial interface clock input uart cts i uart2 clear to send gpio 21 i/o general purpose input/output 21 v2 ssi_fs_rtsn i synchronous serial interface frame sync uart rts o uart2 request to send gpio 20 i/o general purpose input/output 20 u4 ssi_rxd i synchronous serial interface receive gpio 19 i/o general purpose input/output 19 v3 ssi_txd o synchronous serial interface transmit gpio 18 i/o general purpose input/output 18 n26 icam2_c4 i/o icam2 c4 gpio 11 i/o general purpose input/output 11 n24 icam2_c8 i/o icam2 c8 gpio 10 i/o general purpose input/output 10 n23 icam2_setvpp o icam2 vpp gpio 9 i/o general purpose input/output 9 m26 gpio 8 i/o general purpose input/output 8 ae14 gpio 7 i/o general purpose input/output 7 af14 gpio 6 i/o general purpose input/output 6 ad14 gpio 5 i/o general purpose input/output 5 ac14 gpio 4 i/o general purpose input/output 4 c5 gpio 3 i/o general purpose input/output 3 b4 boot mode [2] i select configuration bit 2 during system reset gpio 2 i/o general purpose input/output 2 d5 boot mode [1] i select configuration bit 1 during system reset gpio 1 i/o general purpose input/output 1 c4 boot mode [0] i select configuration bit 0 during system reset gpio 0 i/o general purpose input/output 0 p25 sc2_offn i smartcard off icam2_detect i icam2 detect p24 sc2_cmd o smartcard command icam2_setvcc o icam2 vcc p26 sc2_rst o smartcard reset icam2_reset o icam2 reset n25 sc2_scck o smartcard clock icam2_clk o icam2 clock p23 sc2_da i/o smartcard2 data icam2_c7 i/o icam2 c7 table 17: multiplexed (mux) pins ?continued in this table,?type? reflects mux pin function only. a pin may have other ?type? capabilities as noted in its functional group. see section 6.2 for more details. pin mux contacts primary signal and alternate function type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 37 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. [1] *these pins are included in the xio set. refer to pnx8526 user manual, chapter 8 for additional functions. [2] **the icam1_setvpp and icam1_c8 signals are automatically selected when the icam function is selected. refer to ta bl e 18 (offset 0x04 d600 io_mux_ctr). selecting gpio m ode will disable this icam functionality. 7. functional description figure 3 shows a block diagram of a typica l pnx8526-based system. the system shown is a ?standalone system? which uses the internal mips host. the pnx8526 runs on a single 27 mhz xtal from which all internal and external clocks are derived by on-chip synthesizers. the pnx8526 boots directly from attached flash memory or rom. if de sired, custom boot methods can be programmed using the optional i 2 c boot eeprom. the pnx8526 has three digital video inputs that accept digitized analog video (itu-656), although only two itu-656 st reams can be processed simultaneously. two of these inputs, dv2 and dv3, can also accept scrambled transport streams. the dv inputs support parallel transport stream formats. in addition, a single incoming 1394 transport stream is supported. two selected transport streams can undergo internal de-scrambling and decoding. based on the system implementation, one or both transport streams may pass through point of deployment (pod) or common interface (ci) conditional access modules before transfer into the pnx8526. either a single companion ic, such as the scm microsystems cimax?, or two cimax? ch ips can be used. in the latter case, it is possible to handle dual decoding no ma tter which conditional access system is used. the pnx8526 contains on-chip dvb, multi2 and des hardware de-scramblers, as well as an icam verifier. the entitlement system for these de-scramblers is provided via two smartcard interfaces. the tm32 cpu does further processing on the result of the transport stream de-mux. r25 sc1_offn i smartcard off icam1_detect i icam1 detect r23 sc1_cmd o smartcard command icam1_setvcc o icam1 vcc r24 sc1_rst o smartcard reset icam1_reset o icam1 reset r26 sc1_scck o smartcard clock icam1_clk o icam1 clock t26 sc1_da i/o smartcard1 data icam1_c7 i/o icam1 c7 table 17: multiplexed (mux) pins ?continued in this table,?type? reflects mux pin function only. a pin may have other ?type? capabilities as noted in its functional group. see section 6.2 for more details. pin mux contacts primary signal and alternate function type description philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 38 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. for mpeg2 video, a slice level hl mpeg2 video decoder performs the majority of the mpeg2 algorithm. this mpeg decoder is capable of full-resolution decoding. the tm32 cpu does all mpeg2 processing above th e slice level. two simultaneous sd streams or one hd stream may be processed. all audio processing is done by the tm32 cpu. compre ssed audio will be present in memory from either the transport stream de-multiplex or from the spdif input port. the spdif input port is intended primarily for dtv applications where a spdif source is available from an external so urce device, such as a dvd player. pcm (stereo sample) audio is present in memory from the i 2 s input ports or spdif input. two ac-3 (or equivalent) compressed audio streams may be decoded simultaneously. the tm32 cpu may also pr ocess effects, enhancements and mix the audio data. multi-channel compressed audio or down-mixed stereo pcm audio is transmitted over the spdif output interface. multi-channel audio samples are dolby pro logic? down-mixed into the two stereo i 2 s interfaces to the pnx8510 companion ic. in addition to the two i 2 s inputs and two i 2 s outputs, a bi-directional i 2 s interface is provided. this allows connection of other audio inputs or outputs?headphones, for example. note that there is not enough compute power to support encoding of multi-channel comp ressed audio simultaneous with video processing. so the multi-channel compress ed audio transmitted over spdif must be from one of the original compressed sources. graphics rendering may be accomplished wi th the mips or the tm32 cpu by utilizing the 2d drawing and dma engine . this engine can perform fast area fills, 3-operand bitblt, monochrome data expansion, and lines. it can also be used as a generic dma engine to transfer data between memory locations on a byte-aligned basis. an alpha bitblt capability is also provided to allo w for anti-aliased text and lines as well as source/destination blending operations. once all video and graphics data for specific fields or frames has been generated in memory, the video display pipeline starts processing those images for display. the video processing functions include 6-tap horizontal/vertical scaling, anti-flicker filtering, and de-interlacing (when progressive output is required). the processed images are then combined for each output. up to four surfaces of any supported format may be combined to produce the primary display output. up to two surfaces are combined to produce the secondary ou tput. compositing of more surfaces for future video algorithms is possible by using the tm32 cpu and/or the memory based scaler prior to invoking the compositing/di splay engine. this is subject to cpu and memory bandwidth availability. the pnx8526 contains a 1394 interface wit h 5c copy protection. the pnx8526 1394 can simultaneously transmit two transport streams while receiving one transport stream. the transmitted streams can be partial transport streams (created by pid filtering of an input) or one of the two streams can be software generated. in the case of receiving a scrambled 1394 transport stream input, the stream can either use the on-chip de-scramblers, or may be routed to the external companion ca ic for de-scrambling by the pod/ci ca module(s). the pnx8526 contains a variety of peripheral interfaces to support both astb and dtv requirements. there are two smartcard interfaces, two usb ports, two i 2 c ports, one irda data uart and two general purpose uarts, one of which (uart3) is multiplexed with an ssi interface for soft modem support. the pnx8526 also contains an integrated ide controller, which only requires an external isolation buffer philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 39 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. to implement a full disk interface with sustained speeds up to 10 mb/s. a third-party pci super i/o chip may be utilized to provid e peripheral functiona lity not contained on the pnx8526. function s such as ieee-1284, 10/100 ethernet, floppy drive support, udma66 ide controllers and others are curr ently available in low-cost, commercially available parts. 8. i/o multiplexer control register the i/o multiplexer control register is used to configure the multi function pins to alternate functions as described in ta b l e 17 . control is achieved via the global 2 register io_mux_ctrl ta bl e 18 . fig 3. pnx8526-based system block diagram handbook, full pagewidth mce541 10 10 1 i 2 c i 2 s i 2 c bus 3 16/32/64 mb sdram rgb or y/c 1 cvbs 1 y 1 c (cvbs) 2 a1 r/l 2 a2 r/l 5 gpio pstn i 2 c-1 gpio i 2 s i/o spdifout ssi/uart3 27 mhz i 2 c-2 i 2 s_out1 i 2 s_out2 dv_out2 dv_out1 ts (output) dv3 (656/ts in) dv2 (656/ts in) dv1 (656 in) i 2 s_in1/2 spdifin gpio 64-bit 1394 spdif out aux. audio > = 12 s/w i/o pins analog front-end or modem optional boot eeprom flash xio_sel0 buffer pci super i/o sc1 & sc2 pci-xio8 expansion bus ide udma66 lan 1284 ide 10 mb/s docsis modem pod-1/ nrss-b/ci pod-2/ nrss-b/ci 711x ca interface ic phy ieee 1394 transport stream transport stream oob in analog video oob out to dig vcr to hdtv set from ext. tuner 711x transport stream analog video stereo audio (2 ) spdif in ir remote usb (2 ) uart2 irda data (uart1) smartcard (2 ) pnx8526 pnx8510 tda8004 philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 40 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 9. power supply sequencing power application and power remova l should obey the following rules: 9.1 power on sequence ? apply power to v dd 1.26 v ? allow v dd 1.26 v to stabilize (a pprox.100 ms recommended) ? apply power to v dd 3.3 v table 18: global 2 registers bit symbol access value description 0x04 d600 io_mux_ctrl 31:15 not used ignore during writes and read as zeroes. 14 aio_mux_sel r/w 0x0 i2s_io audio mode: 0 = select i2s_ io as audio out. 1 = select i2s_ io as audio in. 13 ssi_sel r/w 0x0 ssi or uart3 mode: 0 = select uart3. 1 = select ssi. 12 rgb24_sel r/w 0x0 audio out2 or rgb mode: 0 = select audio out2. 1 = select rgb (dv_out [23:20]). 11:10 smcrd2_mux_ctrl r/w 0x0 icam or smartcard2 mode: 00 = smartcard1 module ports go to smartcard2 pins. 01 = smartcard2 module ports go to smartcard2 pins. 10 = icam1 module ports go to smartcard2 pins. 11 = icam2 module ports go to smartcard2 pins. 9:8 smcrd1_mux_ctrl r/w 0x0 icam or smartcard2 mode: 00 = smartcard1 module ports go to smartcard1 pins. 01 = smartcard2 module ports go to smartcard1 pins. 10 = icam1 module ports go to smartcard1 pins. 11 = icam2 module ports go to smartcard1 pins. 7 not used - ignore during writes and read as zeroes. 6:4 vip2_mux_ctrl[2:0] r/w 0x0 vip2 module selection: 000 = vip data from dv1 port 001 = vip data from dv2 port 010 = vip data from dv3 port 011 = vip data from dv_out1(aicp1) port 100 = 1394 data from link core 3 not used - ignore during writes and read as zeroes. 2:0 vip1_mux_ctrl[2:0] r/w 0x0 vip1 module selection: 000 = vip data from dv1 port 001 = vip data from dv2 port 010 = vip data from dv3 port 011 = vip data from dv_out2 (aicp2) port 100 = 1394 data from link core philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 41 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 9.2 power off sequence ? power may be removed from v dd 3.3 v and v dd 1.26 v at the same time ? otherwise remove v dd 3.3 v followed by 1.26 v 10. limiting values 11. thermal characteristics pnx8526 can be used in different environments creating different junction temperatures. the thermal resistance from junction to ambient (i.e. ja) of the pnx8526 in its hbga456 package is around 11.7 c/w. this value is acheived using natural convection, no external heatsink and us ing a jedec defined high-conductive board (see jedec standards 51-2 and 51-7 for details). given the power dissipation of the pnx852 6 and the ambient temperature inside the enclosure, the expected junction temperature can be calculated using the following equation: in some applications the junction temperature may be judged too high, reducing the acceptable lifetime (see section 15 ). however cooling can be improved by fitting an additional external heatsink, or incr easing the airflow around the device. ta bl e 20 shows the improvements that can be ex pected if these measures are taken. table 19: maximum ratings symbol parameter min max typical unit t amb ambient temperature 0 70 - c t stg storage temperature -40 +125 - c t j junction temperature - 100 - c 3-volt i/o pin voltage with respect to v ss -0.5 v dd +0.5 - v 5-volt tolerant i/o pin voltage with respect to v ss -0.5 5.5 - v i/o with non-schmitt trigger input voltage threshold 1.46 1.76 - v i/o with schmitt trigger input threshold vilt 0.93 1.06 - v i/o with schmitt trigger input threshold viht 1.66 1.79 - v i/o transient pin voltage - 10 - v dc supply voltage (v dd i/o pad) 3.0 3.6 - v dc supply voltage (v ddc core logic) 1.20 1.32 - v dynamic power dissipation - 2 - w static power dissipation (aicp off) - 1 - w electrostatic discharge (human body model) - 1.5 - kv t j = t amb + p x r th(j-a) philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 42 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 12. static characteristics the characteristics listed in the following tables apply to standard operating conditions, unless otherwise noted. all voltages are referenced to v ss (0v ground). positive current flows into the referenced pin. the standard operating voltage range is v dd = 3.3 0.3 v dc and v ddc = 1.26 0.06 v dc . all digital i/o pins are 3.3 v tolerant. in all cases described below, digital v dd = 3.3 v+ 5% and operating temperature is 0 to 70 c. all ac timings are based on a 30 pf test lo ad and are measured at a 1.6 v threshold (see figure 4 ) actual i/o voltage threshold is dependant on pad type e.g., schmitt trigger input (see section 6.1 ). the ac voltage characteristics for active signal pins of the controller are listed in ta bl e 21 . signal names for the pci bus configuration are listed, as well as the minimum and maximum voltage, current, and capacitance for each pin. table 20: pnx8526 thermal data heatsink size = 37 x 37 x 10 mm pnx8526 thermal resistance r th(j-a) (c/w) airflow 0 m/s 1 m/s 2 m/s standard 11.7 10.0 8.5 with external h?sink 9.5 7.6 6.3 fig 4. general ac characteristics table 21: digital ac/dc characteristics symbol parameter min max typical unit v il input low voltage -0.5 +0.8 - v v ih input high voltage 2.4 v dd + 0.5 - v v ol output low voltage v ss v ss + 0.4 - v v oh output high voltage 2.4 - - v i ol1 [1] output low current - 5 - ma i oh1 output high current - -5 - ma i ol2 [2] output low current - 8 - ma i oh2 output high current - -8 - ma i ol3 [3] output low current - 12 - ma i oh3 output high current - -12 - ma i ol4 [4] output low current - 14 - ma i oh4 output high current - -14 - ma handbook, 4 columns 2.4 v 1.6 v 0.8 v mce542 philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 43 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. [1] l ol1 (4ma): i2s_in1_sck, i2s_in1_ws, i2s_in2_sck, i2s_in2_ws, i2s_out1_sck, i2s_out1_ws, i2s_out1_sd, i2s_out2_sd, dv1_data[9:0], dv1_valid, dv1_clk, dbg_tdo, jtag_tdo, xtal_out, ua1_tx, ua1_rx, ua2_tx, ua2_rx, ua2_rts, ua2_cts, sc1_da, sc1_cmd, sc1_rst, sc1_scck, sc2_da, sc2_cmd, sc2_rst, sc2_scck, ssi_sclk_ctsn, ssi_fs_rtsn, ssi_rx, ssi_tx, usb_dm[1:0], usb_dp[1:0], usb_bus_pwr [2] i ol2 (8ma): dv_out1[9:0], dv_out2[9:0], dv_clk1, dv_clk2, hsync, vsync, blank, i2s_in1_osclk, i2s_in2_osclk, i2s_io_osclk, i2s_io_sck, i2 s_io_ws, i2s_io_sd[3:0], i2s_out1_osclk, i2s_out2_osclk, i2s_out2_sck, i2s_out2_ws, ts_data[7:0], ts_sop, ts_valid, ts_clk, phy_data[7:0], phy_ctl[1:0], phy_lreq, mm_data[63:0], mm_dqmm_[7:0], mm_cke, i2c1_scl, i2c1_sda, i2c2_scl, i2c2_sda , gpio[11:0], sys_rstn_out, xio_sel[2:0], xio_ack, xio_ad25 [3] i ol3 (12ma): pci_ad[31:0], pci_cbe[3:0], pci_devsel, pc i_frame, pci_irdy, pci_trdy, pci_stop, pci_perr, pci_par, pci_inta, pci_req, pci_gnt, pci_req_a, pci_req_b, pci_gnt_a, pci_gnt_b, pci_serr,mm_we, pll_out, [4] i ol4 (14ma): spdif_out, mm_clk[1:0], mm_addr[11:0], mm_ba[1:0], mm_cs, mm_ras, mm_cas the pin names used in the above notes are the primary names for pci configurations. output signals multiplexed on some pins have the same drive level. v dd = 3.3 v +5%, operating temperature 0 c to 70 c 13. dynamic characteristics 13.1 reset timing 13.2 peripheral controller interface (pci) timing for additional timing diagram information on xio and ide interfaces, see pnx8526 user manual, chapter 8 . i oz output tri-state current - 0.041 - ma c in, c out, c i/o input capacitance - 3.5 - pf i cc power supply current - 1.5 0.9 a i cp power supply current - 0.2 0.13 a table 21: digital ac/dc characteristics ?continued symbol parameter min max typical unit fig 5. reset timing table 22: reset timing symbol parameter min units t low reset_in active pulse width (after stable power) 400 s handbook, 4 columns reset_in mce543 t low philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 44 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. [1] minimum delay is the minimum time after the cloc k edge that a valid signal state from the previous cycle will begin transition to the next state (bec ome invalid). maximum delay is the maximum time after the clock edge that a signal st ate is valid for the next cycle. fig 6. pci timing table 23: pci clk-referenced input timing symbol parameter min unit t su pci_ad[31:0], cbe[3:0] , pci_frame, pci_irdy 7 ns t h pci_ad[31:0] hold 0 ns t h pci_c/be[3:0], pci_frame, pci_irdy, pci_idsel hold 0 ns t su pci_gnt setup 10 ns t h pci_gnt hold 0 ns table 24: pci clk-referenced output valid timing symbol parameter min max unit t od pci_ad[31:0], pci_cbe[3:0] 2 11 ns t od pci_devsel, pci_par 2 11 ns t od pci_stop 2 11 ns t od pci_trdy 2 11 ns t od pci_req 2 12 ns handbook, 4 columns pci clock pci-xio inputs pci-xio outputs mce544 t su t od(min) t od(max) t h philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 45 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 13.3 main memory interface (mmi) timing 13.4 general purpose input/output (gpio) timing [1] if gpio is intended to be timestamped, the minimum pulse width is 75 ns fig 7. mmi timing table 25: mmi timing (mclk-referenced) symbol parameter min max unit t cs setup time with reference to clock 1.5 - ns t ch hold time with reference to clock 0.8 - ns t dso mmi data output setup time with re ference to clock (write cycle) 1.5 - ns t dho mmi data output hold time with reference to clock (write cycle) 0.8 - ns t dsi mmi data input setup with reference to clock (read cycle) 0 - ns t dhi mmi data input hold with reference to clock (read cycle) 2.0 - ns t clk(l) clock low time 2.9 - ns t clk(h) clock high time 2.9 - ns mclk (f) mmi_clk[1:0] - 166 mhz handbook, 4 columns mmi clk mmi control & mmi data valid mce545 t clk(l) t clk(h) mclk(f) t cs t ch t dsi, t dso t dhi, t dho fig 8. gpio timing table 26: gpio timing parameter min max unit gpio as input 10 - ns [1] gpio as output 75 - ns handbook, 4 columns gpio mce546 min 1.5 v philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 46 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 13.5 universal asynchronous recei ver/transmitter (uart) timing [1] max baud rate: 230 kbs 13.6 synchronous serial interface (ssi) timing fig 9. uart timing table 27: uart clk-referenced output timing parameter min max unit uart tx 4.3 - s [1] uart rx 4.3 - s uart rtsn 4.3 - s uart ctsn 4.3 - s handbook, 4 columns uart tx/rx rtsn/ctsn mce547 min 1.5 v fig 10. ssi timing table 28: ssi interface timing (mclk-referenced) symbol parameter min max unit t cs setup time with reference to clock 3 - ns t ch hold time with reference to clock 2 - ns t dso data output setup time with reference to clock 3 - ns t dho data output hold time with reference to clock 2 - ns t dsi data input setup with reference to clock 1.0 - ns t dhi data input hold with reference to clock 1.0 - ns t clk(l) clock low time 25 - ns t clk(h) clock high time 25 - ns handbook, 4 columns ssi_sclk control data valid mce548 t clk(l) t clk(h) t cs t dsi, t dso t dhi, t dho t ch philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 47 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 13.7 i 2 c-bus timing 13.8 ieee 1394 phy-link interface fig 11. i 2 c-bus timing table 29: i 2 c-bus timing symbol parameter min max unit scl scl clock frequency - 400 khz t su(sta) start condition setup time 1 - s t h(sta) start condition hold time 1 - s t low scl low time 1 - s t high scl high time 1 - s t su(sda) data setup time 100 - ns t h(sda) data hold time 0 - ns t dv(sda) scl low to data out valid - 0.5 s t dv(sdo) scl high to data out 1 - s handbook, 4 columns scl sda scl sda valid mce549 t high t su(sta) t dv(sda) t dv(sto) t h(sda) t su(sda) t h(sta) t low fig 12. ieee 1394 phy-link interface timing h andbook, full pagewidth clk_1394 1394 link input port 1394 link output port mce550 t p t h t su f 1394 philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 48 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 13.9 i2s audio input & output timing [1] timing measurements are done with respect to the sck clock edge. the pnx8526 is the source of ai_ws. table 30: ieee 1394 phy-link interface signals symbol parameter min max unit f 1394 clk_1394 frequency 49.147 49.157 mhz t su input setup time for phy_data[7:0], phy_ctl[1:0] 6 - ns t h input hold time 0 - ns t p output propagation delay for phy_data[9:0], phy_lreq, phy_ctl[1:0] - 9 ns fig 13. i2s audio input timing table 31: i2s audio input symbol parameter min max unit f ai_sck audio in ai_sck clock frequency - 20 mhz t su(clk) input setup time to ai_sck (audio interface as slave) 3 - ns t h(clk) input hold time from ai_sck (audio interface as slave) 2 - ns t ws(sck) ai_sck to ai_ws 2 10 ns fig 14. i2s audio output timing handbook, 4 columns valid al_sck al_sd al_ws al_ws valid mce551 t su(clk) f al_sck t h(clk) t ws(sck) handbook, 4 columns valid ao_sck ao_sd ao_ws valid mce552 t sck(dv) t ws(sck) philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 49 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 13.10 sony philips digital interface (spdif) timing 13.11 digital video output (dv out) timing table 32: i2s audio output symbol parameter min max unit ao_sck audio out to ao_sck clock frequency - 20 mhz t sck(dv) ao_sck to ao_sc valid 2 - ns t su(sck) input setup time to ao_sck (audio interface as slave) 2 - ns t h_sck input hold time from ao_sck (audio interface as slave) 2 - ns t ws(sck) ao_sck to ao_ws - 10 ns fig 15. spdif timing table 33: spdif timing symbol parameter min typical max unit t high clk high time (pci) - 5.2 - s t low clk low time (pci) - 5.2 - s handbook, 4 columns mce553 t high t low fig 16. dv out timing table 34: dv out timing symbol parameter min max unit dv_clk video out clock frequency 27 - mhz [1] t clk(dv) dv_clk to dv_out -3.7 0 ns t su(clk) vsync setup time to dv_clk (as input) 3 - ns t h(clk) crt control hold time from dv_clk hsync, vsync, blank 0 - ns handbook, 4 columns valid dv_clk hsync vsync blank dv_out (data) valid mce554 t su(clk) t h(clk) t clk(dv) philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 50 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. [1] dv_clk period is programmable via the internal pll 13.12 digital video input (dv input) timing 13.13 transport stream output (tso) timing fig 17. dv input timing table 35: dv input timing (vdiclk-referenced) symbol parameter min typical max unit t su [7:0] setup 3 - - ns t h [7:0] hold 3 - - ns f dvb clock - 27 - mhz handbook, 4 columns clock 1.5 v 1.5 v 1.5 v inputs (data, sop, error, valid) mce555 f dvb t su t h fig 18. tso timing table 36: tso timing symbol parameter min typical max unit t su data setup 3 - - ns t h data hold 0 - - ns handbook, 4 columns clock output (data, sop, valid) mce556 t su t h philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 51 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 13.14 jtag test contacts 14. delta compared to pnx8525 there are a number of differences between the pnx8526 and the pnx8525 with respect to the physical interfacing of the device. these differences are described in ta bl e 38 . fig 19. jtag timing table 37: jtag timing symbol parameter min max unit t clk(tdo) jtag_tck to jtag_tdo valid delay tbd t su(tck) input setup time jtag_tck tbd t h(tck) input setup time jtag_tck tbd handbook, 4 columns valid tdi tms tck tdo valid mce557 t su(tck) t clk(tdo) t h(tck) table 38: differences - 8525 / 8526 characteristic pnx8525 pnx8526 core supply voltage 1.8 v 5% 1.26 v 0.06 v i2c-bus pads gpio pads with schmitt trigger and pull-ups special i 2 c pads designed to meet the i 2 c specification ieee-1394 pads gpio pads with schmitt trigger and pull-ups special ieee-1394 pads de signed to meet the ieee-1394 link to phy specification pci interface supports 5 v tolerant interface with 3.3 v signalling no 5 v tolerant interface, all signals limited to 3.3 v system reset output (sys_rstn_out) drive capability 12 ma drive capability 8 ma clock output (pll_out) drive capability 12 ma drive capability 8 ma spdif output philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 52 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. [1] the new connections are v dd1 - the i/o supply connection v dd2 - analogue clock generation unit (cab-custom analogue block) v dd3 - trimedia? clock generation pll [2] the new connections are v ddc1 - main core supply connection v ddc2 - 1.728ghz pll supply connection 15. lifetime versus temperature the relationship between operating (junction) temperature and the expected lifetime of a device is shown in figure 20 . drive capability 16 ma drive capability 14 ma dv1 port, ssi, uart2, sm art card1, smart card2 drive capability 4 ma drive capability 5 ma, inputs support hysteresis i2s clk and ws drive capability 4 ma drive capability 5 ma ts interface and i2s data lines hysteresis on inputs not supported hysteresis on inputs supported sdram interface supports 5 v tolerant signalling, with 3.3 v drive. (ad[11:0],clk[1:0], ras,cas, cs, ba[1:0] have drive capability 16 ma) no 5 v tolerant signalling. drive capability 14 ma xio sel[2:0], ack, a25 drive capability 12 ma drive capability 8 ma peripheral power supply single connection on pcb for all v dd bondpads requires separation of v ddc into 3 segments, each segment filtered and star connected back to source. [1] core power supply single connection on pcb for all v ddc bondpads requires separation of v ddc into 2 segments, each segment filtered and star connected back to source. [2] table 38: differences - 8525 / 8526 ?continued characteristic pnx8525 pnx8526 philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 53 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. referring to figure 20 , at a junction temperature of 110 c a 10 year lifetime can be expected (8 hours/day). if increased to 125 c, lifetime can be reduced to 4 years. junction temperature can be influenced by following the guidelines in section 11 . useful life (yrs) vs junction temperature (c). 1% cumm. fails, 8 hrs/day. fig 20. lifetime dependency to temperature handbook, halfpage useful life (years) 100 115 105 120 125 t j ( c) 110 0 25 15 20 5 10 mgx461 philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 54 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 16. package outline fig 21. hbga package outline 1.27 31.75 a a 1 e 1 b a 2 a 2 unit d y e references outline version european projection issue date 00-12-13 02-01-30 iec jedec jeita mm 0.7 0.5 2.6 35.2 34.8 d 1 e 1 31.75 e 2 30.75 29.75 35.2 34.8 30.75 29.75 j 26 22 1.90 1.65 y 1 0.9 0.6 0.15 0.2 0.35 dimensions (mm are the original dimensions) sot610-1 ms-034 144e - - - ew 0.3 v 0 10 20 mm scale sot610-1 hbga456: plastic thermal enhanced ball grid array package; 456 balls; body 35 x 35 x 1.8 mm; heatsink a max. a 1 detail x y y 1 c x e 1 j d d 1 e c a c e g j l n r u w aa ac ae b d f h k m p t v y ab ad af 2468101214161820222426 135791113151719212325 b a ball a1 index area e e e 1 b e 2 1/2 e 1/2 e a c c b ? v m ? w m shape optional (4x) philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 55 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. 17. soldering 17.1 introduction to solder ing surface mount packages this text gives a very brief insight to a complex technology. a more in-depth account of soldering ics can be found in our data handbook ic26; integrated circuit packages (document order number 9398 652 90011). there is no soldering method that is ideal for all ic packages. wave soldering can still be used for certain surface mount ics, but it is not suitable for fine pitch smds. in these situations reflow solder ing is recommended. in these situations reflow soldering is recommended. 17.2 reflow soldering reflow soldering requires solder paste (a suspension of fine solder particles, flux and binding agent) to be applied to the printed- circuit board by scree n printing, stencilling or pressure-syringe dispensing before package placement. driven by legislation and environmental forces the worldwide use of lead-free solder pastes is increasing. several methods exist for reflowing; for example, convection or convection/infrared heating in a conveyor type oven. throughput times (preheating, soldering and cooling) vary between 100 and 200 seconds depending on heating method. typical reflow peak temperatures range from 215 to 270 c depending on solder paste material. the top-surface temperature of the packages should preferably be kept: ? below 220 c (snpb process) or below 245 c (pb-free process) ? for all bga and ssop-t packages ? for packages with a thickness ? 2.5 mm ? for packages with a thickness < 2.5 mm and a volume 350 mm 3 so called thick/large packages. ? below 235 c (snpb process) or below 260 c (pb-free process) for packages with a thickness < 2.5 mm and a volume < 350 mm 3 so called small/thin packages. moisture sensitivity precautions, as indica ted on packing, must be respected at all times. 17.3 wave soldering conventional single wave soldering is not recommended for surface mount devices (smds) or printed-circuit boards with a high component density, as solder bridging and non-wetting can present major problems. to overcome these problems the double-wave soldering method was specifically developed. if wave soldering is used the following co nditions must be observed for optimal results: ? use a double-wave soldering method comprising a turbulent wave with high upward pressure followed by a smooth laminar wave. philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 56 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. ? for packages with leads on two sides and a pitch (e): ? larger than or equal to 1.27 mm, the footprint longitudinal axis is preferred to be parallel to the transport direction of the printed-circuit board; ? smaller than 1.27 mm, the footprint longitudinal axis must be parallel to the transport direction of the printed-circuit board. the footprint must incorporate solder thieves at the downstream end. ? for packages with leads on four sides, the footprint must be placed at a 45 angle to the transport direction of the printed-ci rcuit board. the footprint must incorporate solder thieves downstream and at the side corners. during placement and before soldering, t he package must be fixed with a droplet of adhesive. the adhesive can be applied by screen printing, pin transfer or syringe dispensing. the package can be soldered after the adhesive is cured. typical dwell time of the leads in the wave ranges from 3 to 4 seconds at 250 c or 265 c, depending on solder material applied, snpb or pb-free respectively. a mildly-activated flux will e liminate the need for removal of corrosive residues in most applications. 17.4 manual soldering fix the component by first soldering two diagonally-opposite end leads. use a low voltage (24 v or less) soldering iron applied to the flat part of the lead. contact time must be limited to 10 seconds at up to 300 c. when using a dedicated tool, all other leads can be soldered in one operation within 2 to 5 seconds between 270 and 320 c. 17.5 package related soldering information [1] for more detailed information on the bga packages refer to the (lf)bga application note (an01026); order a copy from your ph ilips semiconductors sales office. [2] all surface mount (smd) packages are moisture sensitive. depending upon the moisture content, the maximum temperature (with respect to time) and body size of the package, there is a risk that internal or external package cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). for details, refer to the drypack information in the data handbook ic26; integrated circuit packages; section: packing methods . table 39: suitability of surface mount ic packages for wave and reflow soldering methods package [1] soldering method wave reflow [2] bga, lbga, lfbga, sqfp, ssop-t [3] , tfbga, vfbga not suitable suitable dhvqfn, hbcc, hbga, hlqfp, hsqfp, hsop, htqfp, htssop, hvqfn, hvson, sms not suitable [4] suitable plcc [5] , so, soj suitable suitable lqfp, qfp, tqfp not recommended [5] [6] suitable ssop, tssop, vso, vssop not recommended [7] suitable pmfp [8] not suitable not suitable philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 57 of 59 9397 750 11715 ? koninklijke philips electronics n.v. 2003. all rights reserved. [3] these transparent plastic packages are extremely sensitive to reflow soldering conditions and must on no account be processed through more than one so ldering cycle or subjected to infrared reflow soldering with peak temperature exceeding 217 q c r 10 q c measured in the atmosphere of the reflow oven. the package body peak temperature must be kept as low as possible. [4] these packages are not suitable for wave soldering. on versions with the heatsink on the bottom side, the solder cannot penetrate between the printed-circ uit board and the heatsink. on versions with the heatsink on the top side, the solder might be deposited on the heatsink surface. [5] if wave soldering is considered, then the package must be placed at a 45 q angle to the solder wave direction. the package footprint must incorporate solder thieves downstream and at the side corners. [6] wave soldering is suitable for lqfp, qfp and tqfp packages with a pitch (e) larger than 0.8 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.65 mm. [7] wave soldering is suitable for ssop and tssop packages with a pitch (e) equal to or larger than 0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm. [8] hot bar or manual soldering is suitable for pmfp packages. 18. revision history table 40: revision history rev date cpcn description 01 20031006 - preliminary d ata (9397 750 11715) philips semiconductors pnx8526 programmable source decoder with integrated peripherals preliminary data rev. 01 ? 6 october 2003 58 of 59 9397 750 11715 ? philips electronics n.v. 2003 all rights reserved. 19. data sheet status [1] please consult the most recently issued data sheet before initiating or completing a design. [2] the product status of the device(s) described in this data sheet may have changed since this data sheet was published. the latest information is available on the internet at url http://www.semicondu ctors.philips.com. [3] for data sheets describing multiple type numbers, the highest-level product status determines the data sheet status 20. definitions short-form specification ? the data in a short-form specification is extracted from a full data sheet with the same type number and title. for detailed information see the relevant data sheet or data handbook. limiting values definition ? limiting values given are in accordance with the absolute maximum rating system (iec 60134). stress above one or more of the limiting values may cause permanent damage to the device. these are stress ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the specification is not implied. exposure to limiting values for extended periods may affect device reliability. application information ? applications that are described herein for any of these products are for illustrative purposes only. philips semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 21. disclaimers life support ? these products are not desi gned for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. philips semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips semiconductors for any damages resulting from such application. right to make changes ? philips semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. when the product is in full production (status ?production?), relevant changes will be communicated via a customer product/process change notification (cpcn). philips semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 22. licenses 23. trademarks nexperia ? is a trademark of koninklijke philips electronics n.v. trimedia ? is a trademark of trimedia technologies inc. opencable ? is a trademark of cable television laboratories inc. dolby prologic ? is a registered trademark of dolby laboratories cimax ? is a registered trademark of scm microsystems inc. 24. contact information for additional information, please visit http://www.semiconductors.philips.com. for sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com. level data sheet status [1] product status [2] [3] definition i objective data development this data sheet contains data from the objective sp ecification for product development. philips semiconductors reserves the right to change the specification in any manner without notice. ii preliminary data qualification this data sheet contains data from th e preliminary specification. supplementary data will be published at a later date. philips semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. iii product data production this data sheet contains data from the product specificat ion. philips semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. relevant changes will be communicated via a customer product/ process change notification (cpcn). purchase of philips i 2 c components purchase of philips i 2 c components conveys a license under the philips? i 2 c patent to use the components in the i 2 c system provided the system conforms to the i 2 c specification defined by phili ps. this specification can be ordered using the code 9398 393 40011. ? koninklijke philips electronics n.v. 2003. printed in netherlands all rights are reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. no liability will be accepted by the publisher fo r any consequence of its use. publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. date of release: 6 october 2003 document order number: 9397 750 11715 contents philips semiconductors pnx8526 programmable source decoder with integrated peripherals 1 general description . . . . . . . . . . . . . . . . . . . . . . 1 2 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4 ordering information . . . . . . . . . . . . . . . . . . . . . 2 5 block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 pinning information . . . . . . . . . . . . . . . . . . . . . . 4 6.1 pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 6.2 pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4 6.2.1 multi-function pins. . . . . . . . . . . . . . . . . . . . . . 30 7 functional description . . . . . . . . . . . . . . . . . . 37 8 i/o multiplexer control register. . . . . . . . . . . . 39 9 power supply sequencing. . . . . . . . . . . . . . . . 40 9.1 power on sequence . . . . . . . . . . . . . . . . . . . . 40 9.2 power off sequence . . . . . . . . . . . . . . . . . . . . 41 10 limiting values. . . . . . . . . . . . . . . . . . . . . . . . . 41 11 thermal characteristics. . . . . . . . . . . . . . . . . . 41 12 static characteristics. . . . . . . . . . . . . . . . . . . . 42 13 dynamic characteristics . . . . . . . . . . . . . . . . . 43 13.1 reset timing . . . . . . . . . . . . . . . . . . . . . . . . . . 43 13.2 peripheral controller interface (pci) timing . . 43 13.3 main memory interface (mmi) timing . . . . . . . 45 13.4 general purpose input/ou tput (gpio) timing. 45 13.5 universal asynchronous receiver/transmitter (uart) timing . . . . . . . . . . . . . . . . . . . . . . . . . 46 13.6 synchronous serial interface (ssi) timing . . . 46 13.7 i 2 c-bus timing . . . . . . . . . . . . . . . . . . . . . . . . . 47 13.8 ieee 1394 phy-link interface . . . . . . . . . . . . . 47 13.9 i2s audio input & output timing. . . . . . . . . . . . 48 13.10 sony philips digital interface (spdif) timing . 49 13.11 digital video output (dv out) timing . . . . . . . 49 13.12 digital video input (dv input) timing. . . . . . . . 50 13.13 transport stream output (tso) timing. . . . . . 50 13.14 jtag test contacts . . . . . . . . . . . . . . . . . . . . . 51 14 delta compared to pnx8525 . . . . . . . . . . . . . . 51 15 lifetime versus temperature. . . . . . . . . . . . . . 52 16 package outline . . . . . . . . . . . . . . . . . . . . . . . . 54 17 soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 17.1 introduction to soldering surface mount packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 17.2 reflow soldering . . . . . . . . . . . . . . . . . . . . . . . 55 17.3 wave soldering . . . . . . . . . . . . . . . . . . . . . . . . 55 17.4 manual soldering . . . . . . . . . . . . . . . . . . . . . . 56 17.5 package related soldering information . . . . . . 56 18 revision history . . . . . . . . . . . . . . . . . . . . . . . . 57 19 data sheet status . . . . . . . . . . . . . . . . . . . . . . . 58 20 definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 21 disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 22 licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 23 trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 24 contact information . . . . . . . . . . . . . . . . . . . . 58 |
Price & Availability of PNX8526EHM0G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |